Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Roof for a 953 cat

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Roof for a 953 cat

    My customer just bought a used 953 Cat loader. Came as an open top with no rops. He wanted something to keep the rain off as well as any errant tree limbs etc. He picks & sells stone to the supply yards. It's not meant to replace the rops but just some protection mainly from the weather.

    Main hoop is 3x3 tube & the rest is 2x2 tube with 1/8" sheet on top. All open tube ends were capped. I determined the height by measureing two other machines with cabs & they were about 5' 2" from the floor to inside of the roof. The roof overall is about 5' square. There were already pads on the machine to bolt it to so I just had to retap the holes as they had not been used in a long time. Painted with spray cans because if I didn't the owner most likely never would have.

    Name:  c50143335fbaa6edd8b2ad90515f72f7.jpg
Views: 1
Size:  43.2 KBName:  58e5d73a2abaf6b3ce1c6609eb6c200d.jpg
Views: 1
Size:  47.1 KBName:  ebd0469e5dd30c9270142356df2513f0.jpg
Views: 1
Size:  48.6 KBName:  80b8e6f49a66c9fe5ac7796009ff74ff.jpg
Views: 1
Size:  47.0 KBName:  5e58b355239c271138b522da6114e6fd.jpg
Views: 1
Size:  47.1 KB
    Last edited by MMW; 05-16-2013, 06:53 AM.

  • #2
    Looks good, I had a freind that did the same on a 941.

    Comment


    • #3
      Roof for a 953 cat

      As some one who grew up in the heavy equipment industry I'd have to say that looks **** good could almost pass as original

      Comment

      Working...
      X
      Special Offers: See the latest Miller deals and promotions.