Announcement

Collapse
No announcement yet.

Chipper & skidder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Chipper & skidder

    I did maintenence work on a track chipper. Basically repair any cracks I find, build up knife pockets & chute behind the pockets. I just try to do the welds on each pocket an even amount to keep it balanced. I haven't had a problem in the past. This time I had to build up inside the disc housing. I just went in as deep as I could reach. Next time we may have to pull the disc out.Click image for larger version

Name:	0423031302.jpg
Views:	1
Size:	44.8 KB
ID:	532239Click image for larger version

Name:	0423031303.jpg
Views:	1
Size:	37.9 KB
ID:	532240Click image for larger version

Name:	0423031258.jpg
Views:	1
Size:	40.6 KB
ID:	532241Click image for larger version

Name:	0423031259.jpg
Views:	1
Size:	38.1 KB
ID:	532242Click image for larger version

Name:	0423031300.jpg
Views:	1
Size:	33.1 KB
ID:	532243
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  • #2
    Here is the skidder blade that I started on. It's just hanging from the skid steer here. Got it cut apart & cleaned up. Mainly just the edge area, not to bad once all the bad stuff is removed. More pics soon. Going back today.Click image for larger version

Name:	0424031358.jpg
Views:	1
Size:	56.0 KB
ID:	515737Click image for larger version

Name:	0424031401.jpg
Views:	1
Size:	56.3 KB
ID:	515738
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      I just love seeing worn out equipment, I see 100.00 $$$$$ signs when I do.

      Comment


      • #4
        Click image for larger version

Name:	0430031643.jpg
Views:	1
Size:	32.7 KB
ID:	515770Click image for larger version

Name:	0430031643a.jpg
Views:	1
Size:	29.5 KB
ID:	515771

        Here is the finished pics. Didn't get to take any till I was leaving. I wanted to get some better ones but as soon as I was done they had me doing some other stuff while they put it back on the skidder. Customer is happy. 1" x 6" hot rolled flatbar for the edge & the bottom. The old pcs. were 3/4" flat bar over the original edge & they lasted some 15 yrs. so these should last a long time.
        MM250
        Trailblazer 250g
        22a feeder
        Lincoln ac/dc 225
        Victor O/A
        MM200 black face
        Whitney 30 ton hydraulic punch
        Lown 1/8x 36" power roller
        Arco roto-phase model M
        Vectrax 7x12 band saw
        Miller spectrum 875
        30a spoolgun w/wc-24
        Syncrowave 250
        RCCS-14

        Comment

        Working...
        X