Announcement

Collapse
No announcement yet.

Cat backhoe wheel

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cat backhoe wheel

    Found these pics in my file. The guy ran the machine with the rear wheel loose for a while & opened up the lug holes pretty good. Rather than weld them up & redrill or weld & die grind I opted to just make a new center pc. & weld it in.Name:  6b6f3daf89d70b194d9bec2ac56d93a5.jpg
Views: 1
Size:  29.1 KBName:  6b06b8e67d0996ce25d2fcc99f3a985a.jpg
Views: 1
Size:  32.0 KBName:  274ed0c7684c2d3dad3683659d7be3f8.jpg
Views: 1
Size:  33.9 KBName:  f18516329f79e77aa59f70e556f90273.jpg
Views: 1
Size:  36.6 KB
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  • #2
    Looks like a nice fix to me! My old employees did that to an old bobcat of mine.

    Comment


    • #3
      MMW, How do you know that you have it pefecty centered, I would be concerned about a high speed wobble at about 12 MPH

      Comment


      • #4
        Originally posted by Portable Welder View Post
        MMW, How do you know that you have it pefecty centered, I would be concerned about a high speed wobble at about 12 MPH
        I used my self leveling/balancing/centering welding wire to make sure it is good.


        I tacked a plate across the center hole, measured in from different spots on the rim to find the center. Center punched it & used my circle cutter on the plasma. Laid out the new center, cut the id/od with the circle cutter, punched holes & welded it in.
        MM250
        Trailblazer 250g
        22a feeder
        Lincoln ac/dc 225
        Victor O/A
        MM200 black face
        Whitney 30 ton hydraulic punch
        Lown 1/8x 36" power roller
        Arco roto-phase model M
        Vectrax 7x12 band saw
        Miller spectrum 875
        30a spoolgun w/wc-24
        Syncrowave 250
        RCCS-14

        Comment


        • #5
          That was not an easy job to get all the spacing right so my hats off too yaaa.

          Comment

          Working...
          X