Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Wheels For A Truck Rack

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Wheels For A Truck Rack

    My truck rack costs me about 1 MPG to carry around on my truck. Since I don't use it on a regular basis I wanted to be able to take it off when not needed and put it back on when it is. I have a set of A-frames, but can't leave it there when it is not on the truck. The area is used for parking, and is also the entrance to the double doors on my shop, not to mention I may need to hoist something else besides the rack.
    I used 2, 5" pieces of 2.5x2.5x1/4" angle iron and 2 pieces of 2x2x1/4" angle and a piece of 5/8" rod for the axle for each one. I sandwiched a piece of 1/4" angle between the other angle already mentioned, and the rod on the other side. Then I welded the rod on both sides to both pieces of angle iron. This makes for a snug slip fit to the bed rail pieces, so no need for set screws to hold it on, gravity does just fine. I put them on at the balance point of the rack and I can move it around like a wheel barrow. I figure some of y'all might be able to use this idea for the same reason I needed it.
    Attached Files

  • #2
    Thats a great idea.Truck rack could use a coat of paint.

    Comment


    • #3
      Originally posted by kevhead63 View Post
      Thats a great idea.Truck rack could use a coat of paint.
      Yeah I know it could. I painted it in Sept 2001 after the 9/11 incident and haven't refreshed it since. That's when I was building it, and was wanting a flag for my truck but everyone was sold out, so I painted the rack like that. Don't know if I will repaint it the same or go with a solid color this time. That paint job takes a few days to do and is kind of labor intensive VS. a solid color.

      Comment


      • #4
        Literature Holder

        Brochures are advertising pieces mainly used to introduce a company or organization, and inform about products and/or services to a target audience.


        Literature Holder

        Comment

        Working...
        X
        Special Offers: See the latest Miller deals and promotions.