Announcement

Collapse
No announcement yet.

Thumb repair PC200

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Thumb repair PC200

    This is actually two repairs that I did on the same machine about 6 months apart. The first time they started to rip the thumb off from the bottom (closest to the bucket). I cut off the lower section, repaired the stick, welding the cut off section back on & added gussets to spread out the load. Then the next time they punced the top part into the stick. Removed another section of the thumb. cut off & replaced part of the stick, installed a wider plate for the thumb again to spread the load better, & weld the ears back on. In the one pic you can see that now the thumb has two seams in the middle of it. It has been fine for awhile now now.
    Name:  2bb88402ef7ee8dc070cc5d11716b650.jpg
Views: 1
Size:  33.1 KBName:  861d67b1b7f97d21014f805626df3ffe.jpg
Views: 1
Size:  43.4 KBName:  a3941f6cfc04289925d9d5a4082dbbd8.jpg
Views: 1
Size:  37.6 KBName:  074c2204e23f02019965b58021c9fe88.jpg
Views: 1
Size:  39.8 KB
    Last edited by MMW; 01-27-2013, 04:24 PM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

  • #2
    Name:  82417451c013f179afe902aa0de597b4.jpg
Views: 1
Size:  50.8 KBName:  8dfb4bc595b198cc6cbb2e10af1477c7.jpg
Views: 1
Size:  48.5 KBName:  e0596b624620124330632197956aad4d.jpg
Views: 1
Size:  44.1 KBName:  92a9cb18dd4c43f321350b6c111b5b2d.jpg
Views: 1
Size:  46.4 KBName:  a0def26e925b71b39a934880a4b4dbe9.jpg
Views: 1
Size:  47.8 KB
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      Nice job on the repair.

      Comment


      • #4
        Nice work looks good.
        BB402D
        TB300D
        DIMENSION652
        MM250X
        MAXSTAR140
        S-32 FEEDER W/1260 IRONMATE FC/GUN
        HT/PWR-MAX1250 PLASMA

        Comment


        • #5
          Pertty

          Comment

          Working...
          X