So - out of work - so while 'waiting for a call' I built a shelf to fit on top of a second toolbox I have in the garage. Just 1" angle (1/8"), some 3" plate (1/8") and a piece of perforated sheet (actually 14 gauge with .5" holes). I'm satisfied - it's level and square - now I just need to spray it - planning on flat black. One pic of the shelf and one of it 'in place' (not yet sprayed). I used a nice, borrowed Bosch circular saw to cut, a Craftsman angle grinder to cut/debur, a Dremmel to do some finer deburring and my MM211 on 110V with flux core .030 wire.
No announcement yet.
Just a shelf - but my first actual project