Announcement

Collapse
No announcement yet.

Welding Project Video: DIY Fireplace

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Welding Project Video: DIY Fireplace

    Hello everyone,

    I am not a professional welder, but I do like to do the occasional project from time to time. My most recent project was an outdoor fireplace, and it turned out really well so I built a second one and made this short instructional video about the procedure. Check it out and let me know what you think!



    Tim Carlielle

  • #2
    Great job on the video.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment


    • #3
      Originally posted by timcarlielle View Post
      Hello everyone,

      I am not a professional welder, but I do like to do the occasional project from time to time. My most recent project was an outdoor fireplace, and it turned out really well so I built a second one and made this short instructional video about the procedure. Check it out and let me know what you think!



      Tim Carlielle
      such a nice video, now we can also do welding at home if required,but next time always wear your safety equipments.

      Comment

      Working...
      X