Announcement

Collapse
No announcement yet.

84" Skidsteer bucket

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • admweld
    started a topic 84" Skidsteer bucket

    84" Skidsteer bucket

    This is a few pics of a bucket im, reflooring and new edge.I cut out the old floor it was 3/16" i,m replacing that with 5/16".Had to cut and straightin the to beam with my chain come along had a big bow in it.
    Attached Files

  • NathanH
    replied
    I see it now. I was thinking the piece was much thicker than it is. Upon closer inspection of the pic I am seeing the bevel making it appear thicker.

    Leave a comment:


  • admweld
    replied
    Originally posted by theweldingweirdo View Post
    the buckets looking good weirdo whats the sq ftg of your shop
    About 700 sq ft.Welcome aboard Mr."Rodgers".For a shop machine in the mig a 252 is a nice unit. Engine drive depends on what up want too spend trailblazer 325 looks like a sweet unit.302 Air pak if you want to air arc and run air tools to do mobile repair is real nice.If not need air 302 diesel another nice unit.All depends on your $$$.

    Leave a comment:


  • Rezeppa
    replied
    Originally posted by NathanH View Post
    Project is looking good. Curious as to what it is that appears to be welded to the front of the bucket. I don't get into much of this type of work but have been around plenty of machinery. Is that to keep floor strait while working? What will be used for cutting edge?
    I like it you answered your own question the thing welded to the front is the cutting edge. They are normally longer and you cut them to fit.

    Leave a comment:


  • NathanH
    replied
    Project is looking good. Curious as to what it is that appears to be welded to the front of the bucket. I don't get into much of this type of work but have been around plenty of machinery. Is that to keep floor strait while working? What will be used for cutting edge?

    Leave a comment:


  • theweldingweirdo
    replied
    what machine you recommend someone starting out to make a littlesidemoney

    Leave a comment:


  • theweldingweirdo
    replied
    the buckets looking good weirdo whats the sq ftg of your shop

    Leave a comment:


  • admweld
    replied
    Almost finished.

    Few more pics.
    Attached Files

    Leave a comment:


  • admweld
    replied
    Originally posted by eecervantes83 View Post
    Where's the pictures of the finished job?
    It,s not done yet.Puttin it back together tommorrow i,ll get you a pic.

    Leave a comment:


  • eecervantes83
    replied
    Where's the pictures of the finished job?

    Leave a comment:

Working...
X