Announcement

Collapse
No announcement yet.

84" Skidsteer bucket

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 84" Skidsteer bucket

    This is a few pics of a bucket im, reflooring and new edge.I cut out the old floor it was 3/16" i,m replacing that with 5/16".Had to cut and straightin the to beam with my chain come along had a big bow in it.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    Where's the pictures of the finished job?
    .
    Miller Bobcat 225NT onan
    Millermatic 211
    Spoolmate 100
    (Retapped to fit regular mig tips)
    Work better & less parts to stock.
    Miller 130xp
    T/A Dragster 85 (portability 11 pounds)
    Oxygen/Acetylene torch set 50'
    2. 4-1/2" grinders
    1. 9" grinder
    14" Makita chop saw
    1/2" Aircat impact gun 900#

    Comment


    • #3
      Originally posted by eecervantes83 View Post
      Where's the pictures of the finished job?
      It,s not done yet.Puttin it back together tommorrow i,ll get you a pic.
      BB402D
      TB300D
      DIMENSION652
      MM250X
      MAXSTAR140
      S-32 FEEDER W/1260 IRONMATE FC/GUN
      HT/PWR-MAX1250 PLASMA

      Comment


      • #4
        Almost finished.

        Few more pics.
        Attached Files
        BB402D
        TB300D
        DIMENSION652
        MM250X
        MAXSTAR140
        S-32 FEEDER W/1260 IRONMATE FC/GUN
        HT/PWR-MAX1250 PLASMA

        Comment


        • #5
          the buckets looking good weirdo whats the sq ftg of your shop

          Comment


          • #6
            what machine you recommend someone starting out to make a littlesidemoney

            Comment


            • #7
              Project is looking good. Curious as to what it is that appears to be welded to the front of the bucket. I don't get into much of this type of work but have been around plenty of machinery. Is that to keep floor strait while working? What will be used for cutting edge?
              Campbell Hausfeld 110V MIG
              Jo Ann Fabrics Hot Glue Gun

              Comment


              • #8
                Originally posted by NathanH View Post
                Project is looking good. Curious as to what it is that appears to be welded to the front of the bucket. I don't get into much of this type of work but have been around plenty of machinery. Is that to keep floor strait while working? What will be used for cutting edge?
                I like it you answered your own question the thing welded to the front is the cutting edge. They are normally longer and you cut them to fit.
                Never Satisfied

                Millermatic 211
                Maxstar 150STL
                Metabos
                Kennedy Maintenance Pro Full
                Makita Cordless 18v Li-Ion
                Stihl TS 420

                Timfrank88@live.com

                Comment


                • #9
                  Originally posted by theweldingweirdo View Post
                  the buckets looking good weirdo whats the sq ftg of your shop
                  About 700 sq ft.Welcome aboard Mr."Rodgers".For a shop machine in the mig a 252 is a nice unit. Engine drive depends on what up want too spend trailblazer 325 looks like a sweet unit.302 Air pak if you want to air arc and run air tools to do mobile repair is real nice.If not need air 302 diesel another nice unit.All depends on your $$$.
                  BB402D
                  TB300D
                  DIMENSION652
                  MM250X
                  MAXSTAR140
                  S-32 FEEDER W/1260 IRONMATE FC/GUN
                  HT/PWR-MAX1250 PLASMA

                  Comment


                  • #10
                    I see it now. I was thinking the piece was much thicker than it is. Upon closer inspection of the pic I am seeing the bevel making it appear thicker.
                    Campbell Hausfeld 110V MIG
                    Jo Ann Fabrics Hot Glue Gun

                    Comment

                    Working...
                    X