Announcement

Collapse
No announcement yet.

Cat Loader cab repairs

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Cat Loader cab repairs

    Few pics of repairs i made to a 938G.It,s a 02 with 8000hrs.Door sills,lower window channels,cab corners all rotted out.Also Bucket cheek plate was junk/thin cut out and replaced with 1/2"hr.Also put new heel skids pads under side bucket 1"AR400 no pics of those sorry.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    Nice work! Where is and what is this working in? Seems a little prematrure to have that much rot at the lower cab area.
    Campbell Hausfeld 110V MIG
    Jo Ann Fabrics Hot Glue Gun

    Comment


    • #3
      This was a vermont muncipal used machine.Basically never got wash/rinsed or the cab floor cleaned out.Ther was alot of sand under the mat and about the cab.If i was to guess it was loading salt also to sanders.
      BB402D
      TB300D
      DIMENSION652
      MM250X
      MAXSTAR140
      S-32 FEEDER W/1260 IRONMATE FC/GUN
      HT/PWR-MAX1250 PLASMA

      Comment


      • #4
        Kinda what I was thinking. Operator not paying for the machine. Constant in and out with salty boots and never cleaned. That salt sitting is just havoc on anything.
        Campbell Hausfeld 110V MIG
        Jo Ann Fabrics Hot Glue Gun

        Comment


        • #5
          Gonna snap a pic of whole machine for ya,s it cleaned up nice.
          BB402D
          TB300D
          DIMENSION652
          MM250X
          MAXSTAR140
          S-32 FEEDER W/1260 IRONMATE FC/GUN
          HT/PWR-MAX1250 PLASMA

          Comment


          • #6
            pic i promised

            Here a couple more for ya,s.They gonna replace the left skid under bucket after winter money low at this point.
            Attached Files
            BB402D
            TB300D
            DIMENSION652
            MM250X
            MAXSTAR140
            S-32 FEEDER W/1260 IRONMATE FC/GUN
            HT/PWR-MAX1250 PLASMA

            Comment


            • #7
              Impressive job there man

              Comment

              Working...
              X