Announcement

Collapse
No announcement yet.

how to make welding stand for coupons?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • how to make welding stand for coupons?

    I've been watching you tube videos lately, and seen welding school shops and in their booths they had posts with a small steel table and then adjustable arms to move to where you like. I know the generally jist of them. I would like to fab one up for myself to work on vertical welding and to try overhead. But I don't know how to make the clamping mechanism to hold the steel. And to be able to hold metal for butt welds fillets and others, I have not seen one up close, so I would like to know how they clamp the metal so i can make one of my own, any help or pictures would be great! Thanks for your time!

  • #2
    The ones I've seen lately just have a spring-clamp that is welded to the arm.
    Some of them use "C" Clamps on the arm.
    Lincoln Vantage 400
    Trailblazer® 302 Air Pak™

    Miller Dynasty® 350
    Millermatic 350P Aluminum
    Millermatic® 252
    Syncrowave 351
    Lincoln LN-25 Pro

    Multimatic™ 200

    XR-Aluma Pro Gun
    Diversion™ 180

    Spectrum® 625 X-TREME™

    Thermal Dynamics® Cutmaster® 52
    Victor Oxy/Acetylene Set

    Comment


    • #3
      Just tack some bars together to suit ur needs

      Comment


      • #4
        how to make welding stand for coupons?

        The ones we use have the table top that's adjustable in height and also another sleeve over the center pipe with a piece of pipe attached. Tack your coupons to the pipe and use the table to steady yourself for overhead practice.

        Comment

        Working...
        X