If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
As I am getting older I don't want to waste energy lifting a bike onto a stand when I come into the pits. I have seen these bike chocks I thought that I should be able to convert it over to a bike stand.
I drew a cad drawing purchased some materials and started in on the fabrication.
Once the bike is pushed into the stand you can service the bike without it falling over.
The main benifit is to ride straight into it and hop off without having to mess around with finding a stand.