Announcement

Collapse
No announcement yet.

Tent Peg Puller

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tent Peg Puller

    Camping in Black soil country has its trials.
    The first one is getting the tent pegs out at the end of the weekend.
    Last weekend we were at North Star NSW.
    My 17 year old son and I had to lift as hard as we could together to extract the pegs from the ground.
    I tested the same pegs at home in our soil and could not move them exerting a force of 45 kilos.
    I decided to fabricate a Tent Peg Puller to solve this problem.
    Cost for materials was $20.00 and took an hour of labour.
    This puller will lift 66 kilos of weight for a 10 kilo effort.
    Tested it at home and it rips the pegs out of the ground.

    Ji
    Attached Files
    Grip it and Rip it

  • #2
    Cool, how flat does it fold down?

    Not a fan of plastic stakes in that kind soil though. I would Fab some aluminum ones or steel if weight isn't an issue.
    Joe
    wrench3047@gmail.com

    Comment


    • #3
      Hi Joe,
      The pivot bolt has a wing nut so I will just pull it a part each time as it takes seconds to assemble.
      I put it in the canvas tent peg bag so it will not get lost or left behind.

      Those plastic pegs hold in Black Soil let me tell you.
      They cost $5.00 each.
      Even driving them in is an effort.

      Ji
      Grip it and Rip it

      Comment


      • #4
        Looks good.

        Comment


        • #5
          Tent Peg Puller

          Cool

          Comment


          • #6
            Thank you for the kind words.

            Ji
            Grip it and Rip it

            Comment


            • #7
              Cool!
              Professional firefighter (retired). Amateur everything else I try to do...
              Oh yeah: GO BIG RED!

              Comment


              • #8
                nice! you could even pull ''T'' posts with that.

                Comment


                • #9
                  We call them Star Pickets.
                  I have seen backhoes pull them out of the ground.
                  Some times even backhoes struggle.
                  There is a scaled up model made of steel that they sell here for picket recovery.
                  The compression strut on mine is only 1 foot long.

                  Ji

                  Grip it and Rip it

                  Comment


                  • #10
                    We used the plastic ones simular to those when i was in the boy scouts. I always had to pull them back out with a stick or hatchet for leverage. Only about 25% survived the second use. When in high school I made alum ones and the plastic ones stayed on the trailer after that collecting dust. I'm sure if we had a cool puller like that more plastic ones would have survived.
                    Joe
                    wrench3047@gmail.com

                    Comment


                    • #11
                      Love it basic and simple but geys the job done. Cheaper than a gym membership.
                      Never Satisfied

                      Millermatic 211
                      Maxstar 150STL
                      Metabos
                      Kennedy Maintenance Pro Full
                      Makita Cordless 18v Li-Ion
                      Stihl TS 420

                      Timfrank88@live.com

                      Comment


                      • #12
                        This peg extractor lifts them straight up instead of side ways which breaks them. When we pulled them out by hand some side ways force was induced into the plastic pegs. If that was to happen a few times the pegs would break.
                        Simple parts and simple fabrication.
                        Old school.

                        Ji
                        Grip it and Rip it

                        Comment


                        • #13
                          Cool, good idea! It definitely does resemble a T-post puller

                          Comment


                          • #14
                            It is just a first class lever.
                            Humans have been using them for a long time.
                            Similar to a star picket remover except smaller, made from ali and adjustable for when the peg starts up.

                            Ji
                            Grip it and Rip it

                            Comment


                            • #15
                              For car camping, I use old railroad spikes. We have some nasty hard clay around here. I did get a good deal on some forged, 4130 tent stakes at a surplus place once. I think they are for pounding through asphalt.
                              Miller stuff:
                              Dialarc 250 (1974)
                              Syncrowave 250 (1992)
                              Spot welder (Dayton badged)

                              Comment

                              Working...
                              X