Announcement

Collapse
No announcement yet.

recent job

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • recent job

    Few pics of railing just did.
    Attached Files
    BB402D
    TB300D
    DIMENSION652
    MM250X
    MAXSTAR140
    S-32 FEEDER W/1260 IRONMATE FC/GUN
    HT/PWR-MAX1250 PLASMA

  • #2
    recent job

    Hmm is that just 1 1/2? Pipes cut at random lengths and shoved into wooden posts then painted with a rattle can?

    Comment


    • #3
      Um...NO

      Originally posted by drpipe View Post
      Hmm is that just 1 1/2? Pipes cut at random lengths and shoved into wooden posts then painted with a rattle can?
      If you looked closer you would notice brackets ON the posts...but I'm sure his welds are not near as good as yours 24k...shame your eyes aren't near as good though.
      MillerMatic 211 Auto-set w/MVP
      Just For Home Projects.

      Comment


      • #4
        The brackets are anchored with lag screws into the post.
        Attached Files
        BB402D
        TB300D
        DIMENSION652
        MM250X
        MAXSTAR140
        S-32 FEEDER W/1260 IRONMATE FC/GUN
        HT/PWR-MAX1250 PLASMA

        Comment


        • #5
          Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
          Looks good.

          Comment


          • #6
            Originally posted by walker View Post
            Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
            Looks good.
            Yes but,what keeps the wood from burning?

            Comment


            • #7
              Originally posted by walker View Post
              Oh, you used lags. Next time try a birch dowel at about 75 amps, to stick weld them on. If you get the foil covered dowels from the craft store you can do aluminum to wood as well
              Looks good.
              I,ll stick with lag screws thanks.
              BB402D
              TB300D
              DIMENSION652
              MM250X
              MAXSTAR140
              S-32 FEEDER W/1260 IRONMATE FC/GUN
              HT/PWR-MAX1250 PLASMA

              Comment


              • #8
                recent job

                Lmfao ........ Did ya stove pipe it

                Comment


                • #9
                  Originally posted by Cornerstone View Post
                  Yes but,what keeps the wood from burning?
                  You just keep the amps low, and like some guys do with 6010, you can dunk 'em in water, as they need a little moisture to lay a good bead.

                  Comment


                  • #10
                    Originally posted by walker View Post
                    You just keep the amps low, and like some guys do with 6010, you can dunk 'em in water, as they need a little moisture to lay a good bead.
                    wood needs oxygen to burn, keep your shopvac near by and suck-it

                    edit: sorry for hyjacking the subject, the work done is a good job and i'm sure the customer is happy about it.

                    note: english not being my first language people here made me work harder to keep up with the birch dowell thing...lmao too ;o)
                    Last edited by snowbird; 07-11-2012, 03:15 PM.

                    Comment


                    • #11
                      Originally posted by drpipe View Post
                      Lmfao ........ Did ya stove pipe it
                      What are you looking at ?? Focus, focus. The brackets are fastened with lag
                      screws to the post. Pipe railing is welded to the bracket. Hard to see to a untrained eye. Pipe and brackets are black and post are white.

                      Comment


                      • #12
                        recent job

                        Bd1 I use my iPhone to play on the net at work when I'm not making flawless welds I come here or surf **** sites ....... Pardon me to the welder I was looking at very small pics ...... Bitty1 your not going to get me going cause your not worthy to carry my rod bucket

                        Comment


                        • #13
                          Originally posted by drpipe View Post
                          Bd1 I use my iPhone to play on the net at work when I'm not making flawless welds I come here or surf **** sites ....... Pardon me to the welder I was looking at very small pics ...... Bitty1 your not going to get me going cause your not worthy to carry my rod bucket
                          drpipe should be bought for what he is worth and sold for what he thinks he worth. I always say show your worth with your work not your mouth. flawless welds blah blah blah don't hurt your shoulder pattin yourself on the back. What a Richard!

                          Comment


                          • #14
                            Originally posted by corbyndad View Post
                            drpipe should be bought for what he is worth and sold for what he thinks he worth. I always say show your worth with your work not your mouth. flawless welds blah blah blah don't hurt your shoulder pattin yourself on the back. What a Richard!
                            Yes indeed, "It's best to engage brain before opening mouth.'' Difficult at times,and could get to in trouble.

                            Comment


                            • #15
                              recent job

                              **** your breaking my heart whoopty woo ... Don't hate. I got a raise today the doctor is making 40 hr to weld rollout on pipe spools all day..... Well that and decide where to put the field tie ins and decypher the blueprints

                              Comment

                              Working...
                              X