Announcement

Collapse
No announcement yet.

7018 3/32 uphill

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    now do it with 1/4" rod

    Comment


    • #17
      Here is some 1/8" and 3/32" 7018

      Name:  34a3346c50f5749ab700ff98c586b1c2.jpg
Views: 2
Size:  21.0 KB
      Name:  993d9aa52443242fa82abf00666ff25f.jpg
Views: 2
Size:  16.1 KB

      Comment


      • #18
        Originally posted by Pipewelder101 View Post
        Name:  34a3346c50f5749ab700ff98c586b1c2.jpg
Views: 2
Size:  21.0 KB
        Name:  993d9aa52443242fa82abf00666ff25f.jpg
Views: 2
Size:  16.1 KB
        Very nice indeed. If that's a position weld,how about some pics of the bottom.

        Comment


        • #19
          That was some fab I did at work in stands so they look the same all they way around. This job I been stuck with the small bore 2 1/2,3,4 so I jump to go to 8" and 10". You guy would have a good laugh if I posted pics of the welder I use its a old very well used Dial-a-arc that i has a mind of its own. I posted some small bore pic that where done in place.

          Comment

          Working...
          X