Announcement

Collapse
No announcement yet.

WTB 2 and 4 inch rings

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • WTB 2 and 4 inch rings

    I have a couple of projects, and I'm looking for 2 and 4 inch steel rings from 1/4 inch round bar, I need 24 of each size.

  • #2
    WTB 2 and 4 inch rings

    check out king architectural metals they have decorative rings for fencing and gates

    Comment


    • #3
      Contact your local blacksmith. I can't tell you how many rings I have made over the years. If you have a torch they can be made fairly easily. I would do it, but am still somewhat backlogged at the moment.

      Comment


      • #4
        Originally posted by walker View Post
        Contact your local blacksmith. I can't tell you how many rings I have made over the years. If you have a torch they can be made fairly easily. I would do it, but am still somewhat backlogged at the moment.
        I have a powered ring maker that uses 10' barstock at a time then cut then to a ring but zero time...Bob
        Attached Files
        Last edited by aametalmaster; 06-19-2012, 07:18 PM.
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          if they are only for ornamental...

          get used springs from overhead doors and cut them parallel to the lenght with a zip cut.

          again not for structural use ...tempered steel that is

          Comment

          Working...
          X