Announcement

Collapse
No announcement yet.

Aluminum Ramps (car trailer)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aluminum Ramps (car trailer)

    Ive been slowly working on these ramps for my car trailer, getting tired of lugging around the heavy steel ramp I have. I should be testing them out this weekend, just have to finish the mount on the trailer. I used a mix of mig and tig, they are made out of 6061 2.5" sqaure tubing 1/8" thick. Not sure of their max capacity but they should work fine for my mustang and most cars. I would have rather of used 1/4" thick tubing but this is what I had available at the time.
    Name:  453ea30df3b3f59e0ef6dd80b1d7dffe.jpg
Views: 1
Size:  104.6 KBName:  37fb52c1688f03c080b8d095709d17f5.jpg
Views: 1
Size:  58.0 KBName:  ea35abff2505d90ea8056357661ddfc6.jpg
Views: 1
Size:  69.2 KB

  • #2
    Looks like those will work good...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment

    Working...
    X