Announcement

Collapse
No announcement yet.

Aluminum Ramps (car trailer)

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aluminum Ramps (car trailer)

    Ive been slowly working on these ramps for my car trailer, getting tired of lugging around the heavy steel ramp I have. I should be testing them out this weekend, just have to finish the mount on the trailer. I used a mix of mig and tig, they are made out of 6061 2.5" sqaure tubing 1/8" thick. Not sure of their max capacity but they should work fine for my mustang and most cars. I would have rather of used 1/4" thick tubing but this is what I had available at the time.
    Click image for larger version

Name:	IMG_6668.JPG
Views:	1
Size:	104.6 KB
ID:	530701Click image for larger version

Name:	IMG_6669.JPG
Views:	1
Size:	58.0 KB
ID:	530702Click image for larger version

Name:	IMG_6670.JPG
Views:	1
Size:	69.2 KB
ID:	530703

  • #2
    Looks like those will work good...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment

    Working...
    X