Announcement

Collapse
No announcement yet.

exhaust pipe

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • exhaust pipe

    My exhaust pipe fell off right after my catalytic converter on my truck and I only have a stick welder. Any advice or suggestions? Is a stick too heavy for something like this? Thanks

  • #2
    Yes you can use stick but use the smallest rods you can find...Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      exhaust pipe

      Any pipe after the cat any good, slip a pipe over and clamp it.
      Kevin

      Comment


      • #4
        If it is rusty and thin, no hope. But it the metal is good, I've welded plenty with my AC stick welder. It's not easy, but do a little at a time with a small rod and it can be done. I made a full catback system for my superharged Miata.
        CG
        Old Miller Swinger 180 Buzzbox
        Miller Diversion 165
        1945 Craftsman Atlas Lathe
        Smithy Lathe/Mill

        Comment

        Working...
        X