Announcement

Collapse
No announcement yet.

tool rack

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • tool rack

    I need to build a tool rack for stick welding. I would like to have a spot for a slag hammer, rods, brush, and stinger. If anybody has any ideas that would be great! Thanks!

  • #2
    hi, I made this with some scrap I had. You maybe able to adapt to your needs. My table has holes on the perimeter so I can move it anywhere. I have small sledge, files , chip hammer, brush and square to right and assorted ''C" clamps on the bar in back. The inside holds chisel ,soapstone, tape , and what ever.
    Name:  ea1704cd94d51fc0da73663eb6292be6.jpg
Views: 1
Size:  46.4 KBName:  bd56d1b42fd4f9151e8cb10b9ba787d8.jpg
Views: 1
Size:  62.6 KB

    Comment


    • #3
      Hard to picture exactly what you mean but thanks for the reply. No one else seems to care hahaha.

      Comment


      • #4
        did you open the pictures ?? Click on the BLUE attachments .

        Comment


        • #5
          I don't see any attachments. I'm new to this forum so is there something im missing?

          Comment


          • #6
            Haha I found it. Looks like a good idea. Probably won't make the same exact thing but I like the part for the files and hammer. Thanks for posting the pics. Its nice that someone cares! Thanks again!

            Comment


            • #7
              GLAD you saw it. I made that and posted it on another site . Here's that site and the posting.

              http://weldingweb.com/index.php

              http://weldingweb.com/showthread.php?t=64556&page=6

              http://weldingweb.com/showthread.php?t=107161 Welders finger or third hand. You might want to make one of these too.

              Comment

              Working...
              X