Announcement

Collapse
No announcement yet.

Truck or dolly for stomp shear

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Truck or dolly for stomp shear

    I have a stomp shear in an outbuilding that is too small to shear a 4x8 or 4x10 sheet either way, building is long and narrow. So I built a truck to turn the shear 90° and back again depending on which edge of a sheet I need to shear.

    Built a frame to set inside the shear frame.


    Hinges for the wheels.


    Last edited by pro70z28; 03-22-2012, 12:46 PM.

  • #2
    Added a table frame to catch the material as it come off the shear.


    Added an extended gauge (still more to do on that) to handle longer cut off than the 26'' factory gauge. Couple shocks so it drops slow when the lock is released.


    Gave it a hammered paint finish to match the shear.


    Cobbled a pair of brackets together for the floor jacks so I could get the shear off the ground far enough to slide the truck under the shear & not be in the way.

    Comment


    • #3
      Moment of truth to see if there are any clearance issues with moving parts.



      It all fits & rolls surprisingly easy once the 2 swivel wheels align.



      Still have to finish up the fence for the gauge & make an aluminum top for the table.

      Comment


      • #4
        What a nice, well thought out, professional looking piece of work!!!

        but then again... your stuff always looks pro... we should expect no less of you...

        always a pleasure to see what you are working on....

        keep up the nice work!!!....
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment


        • #5
          That is really a nice piece of work!!! They say necessity is the mother of invention and you've done it with style!

          I can't wait to see the pro z28 finished!
          Blondie (Owner C & S Automotive)

          Colt the original point & click interface!

          Millermatic 35 with spot panel
          Miller 340A/BP
          Victor O/A torches
          Lincoln SP125
          Too many other tools to list

          03 Ram 1500
          78 GS1000
          82 GL1100 Interstate

          Comment


          • #6
            I have a similar type made by Niagra. Very versitile machine. It has a 52 inch wide blade but with the set back throat, it can really cut any size. It can cut up to 16 gauge steel and I cut 1/8 aluminum with it, I just used it yesterday to cut vct floor tile that I installed in the office and waiting areas.
            I think I will convert it to pneumatic power soon, gets old stomping on it.
            2- XMT's 350 cc/cv
            1- Blue star 185
            1- BOBCAT 250
            1- TRAILBLAZER 302
            1- MILLER DVI
            2- PASSPORT PLUS
            1- DYNASTY 200 DX
            1- DYNASTY 280 DX
            1- MAXSTAR 150 STL
            1- HF-251 BOX
            1- S-74D
            1- S-75DXA
            2- 12-RC SUITCASES
            1- 8-VS SUITCASE
            2- 30 A SPOOLGUNS

            Comment


            • #7
              Thanks H80N

              Thanks Blondie. I've been trying to get back on the "Z" project but other stuff (like the shear) take up all my free time.

              fabricator I use this one 90% of the time to shear .080 aluminum for road construction signs. Someday I'll use it to make the interior for the "Z", I hope.

              Comment


              • #8
                Pro70z28,
                I know what that's like. I have my project I call "Old Wing" tucked in the corner of my shop, waiting on me to find time to work on it. Oh I must not forget about my Gravely L8 either.

                At any rate I haven't seen you post anything but first class work on the site and I'm sure it will be reflected in the Z28 when it's done as well.
                Blondie (Owner C & S Automotive)

                Colt the original point & click interface!

                Millermatic 35 with spot panel
                Miller 340A/BP
                Victor O/A torches
                Lincoln SP125
                Too many other tools to list

                03 Ram 1500
                78 GS1000
                82 GL1100 Interstate

                Comment


                • #9
                  Thanks Blondie.

                  Comment

                  Working...
                  X