Announcement

Collapse
No announcement yet.

gooseneck to car hauler

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • gooseneck to car hauler

    howdy everyone. this is my 1st post. been looking around here for a couple of weeks.
    10" 15.3lb c channel for the neck
    2x4 1/4 wall for the deck
    3" sch80 pipe for the tilt

    this weekend im turning my gooseneck to a 3 car hauler. i have some plans drawn out. check it out. let me know of anything that i should change.

    this is my trailer now
    Click image for larger version

Name:	2011-09-14_16-28-55_47.jpg
Views:	1
Size:	37.8 KB
ID:	530605

    this is the drawing
    Click image for larger version

Name:	2012-02-27_17-21-54_565.jpg
Views:	1
Size:	14.3 KB
ID:	530607

    something like this is what it would look like next week
    Click image for larger version

Name:	caf1_11.jpg
Views:	1
Size:	30.9 KB
ID:	530606

    Click image for larger version

Name:	83489819.jpg
Views:	1
Size:	94.7 KB
ID:	530608

  • #2
    Looks like you could haul 3 cars on it now as is, if the axles are rated for the weight. Why change it up? All you need are a set of ramps and tie downs.

    Comment


    • #3
      Originally posted by Bistineau View Post
      Looks like you could haul 3 cars on it now as is, if the axles are rated for the weight. Why change it up? All you need are a set of ramps and tie downs.
      Its got 45ft of deck. 3 7k axles. I can fit 2 of just bout anything. But 3 small cars. Its got 8 ft that is unused.

      Comment


      • #4
        Originally posted by jsstrans View Post
        Its got 45ft of deck. 3 7k axles. I can fit 2 of just bout anything. But 3 small cars. Its got 8 ft that is unused.
        Nice. Was wondering what you were going to pull it with...Bob
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          Originally posted by aametalmaster View Post
          nice. Was wondering what you were going to pull it with...bob
          f550

          Comment

          Working...
          X