Here are some pictures of my latest welding project. I am building a 83"x14' dual atv trailer. I got most of my insperation from a BigTex Trailer model. The frame is 3x2x1/4" angle with 2x2x3/16" crossmember 16" O.C. I used 3" x 4.1# as the tongue and wrapped it around the frame to the spring supports. The rail is made of 2x2x1/8" and the two removable side ramps are made of 2x2x3/16" sides with 2x2x1/8" rungs 8" O.C. The weather turned cold fast so this is as far as i have gotten. I still have to build the rear gate/ramp ,brackets for light, primer, paint, ect.
No announcement yet.