Announcement

Collapse
No announcement yet.

Another project from the Newbie

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another project from the Newbie

    This is my 'Multi-purpose Repositioning Device' (what I move stuff with). I have a 4WD TCI 525 Forklift and had a job of installing a Holmes 750 wrecker body, tool boxes and booms/winches on a different truck. Had to build additional doors and tool boxes as the replacement truck had a much longer frame than the one the wrecker was removed from. I quick built this gizzmo to install the stuff. Been using it ever since. Handy tool. Second pic is of an old scraper blade I use here on the farm. Added a hydraulic cylinder to angle the blade from the tractor seat. Also a handicap scooter ramp/carrier for my wife's scooter. and finally a humungous bucket that I rebuilt. Installed new wear bars, cutter blades, teeth,etc. Pic is showing just the wear bars installed.
    Name:  45065503f8da2015e74f2679c7ed510a.jpg
Views: 1
Size:  80.5 KBName:  a3441b215a3b3f3be3d4e3bf73359bdf.jpg
Views: 1
Size:  59.9 KBName:  aa16d79017dde48596228674f304b88a.jpg
Views: 1
Size:  78.1 KBName:  5f3a0c6ae74abb6b59141f2063e52127.jpg
Views: 1
Size:  62.3 KB
    Last edited by PA Weldor; 01-08-2012, 03:05 PM.

  • #2
    Nice job.

    Comment


    • #3
      Cool and well thought out project.
      Professional firefighter (retired). Amateur everything else I try to do...
      Oh yeah: GO BIG RED!

      Comment

      Working...
      X