Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

Another project from the Newbie

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • Another project from the Newbie

    This is my 'Multi-purpose Repositioning Device' (what I move stuff with). I have a 4WD TCI 525 Forklift and had a job of installing a Holmes 750 wrecker body, tool boxes and booms/winches on a different truck. Had to build additional doors and tool boxes as the replacement truck had a much longer frame than the one the wrecker was removed from. I quick built this gizzmo to install the stuff. Been using it ever since. Handy tool. Second pic is of an old scraper blade I use here on the farm. Added a hydraulic cylinder to angle the blade from the tractor seat. Also a handicap scooter ramp/carrier for my wife's scooter. and finally a humungous bucket that I rebuilt. Installed new wear bars, cutter blades, teeth,etc. Pic is showing just the wear bars installed.
    Name:  45065503f8da2015e74f2679c7ed510a.jpg
Views: 1
Size:  80.5 KBName:  a3441b215a3b3f3be3d4e3bf73359bdf.jpg
Views: 1
Size:  59.9 KBName:  aa16d79017dde48596228674f304b88a.jpg
Views: 1
Size:  78.1 KBName:  5f3a0c6ae74abb6b59141f2063e52127.jpg
Views: 1
Size:  62.3 KB
    Last edited by PA Weldor; 01-08-2012, 02:05 PM.

  • #2
    Nice job.

    Comment


    • #3
      Cool and well thought out project.

      Comment

      Working...
      X
      Special Offers: See the latest Miller deals and promotions.