Announcement

Collapse
No announcement yet.

welding (solder) 2 american coins

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • welding (solder) 2 american coins

    I am lookind for something that can solder american coins (NOT ONE CENT) 0.05, 0.10, 0.25 cents side by side like forming an 8 and then attached another and another one like a line of 10 coins side by side. Any sugestion? Thank you. Mackie

  • #2
    I would shy away from that.

    United States Code
    TITLE 18
    PART I
    CHAPTER 17
    § 331. Mutilation, diminution, and falsification of coins

    Whoever fraudulently alters, defaces, mutilates, impairs, diminishes,
    falsifies, scales, or lightens any of the coins coined at the mints of
    the United States, or any foreign coins which are by law made current
    or are in actual use or circulation as money within the United States;
    or whoever fraudulently possesses, passes, utters, publishes, or
    sells, or attempts to pass, utter, publish, or sell, or brings into
    the United States, any such coin, knowing the same to be altered,
    defaced, mutilated, impaired, diminished, falsified, scaled, or
    lightened? Shall be fined under this title or imprisoned not more than
    five years, or both.

    Do people sometimes do this and get away with it?
    Sure they do. We've all seen it and yet no one seems to be swooping
    down on the violators to haul them off to jail.

    If this is the law spelled out before us in black and white then why
    doesn?t the government prosecute everyone who does it?
    Your guess is as good as mine; but nevertheless, there?s the law, just
    as it is written.

    Copied from this link...
    http://answers.google.com/answers/threadview?id=426715
    MillerMatic 211 Auto-set w/MVP
    Just For Home Projects.

    Comment


    • #3
      Use foreign currency

      Here in Canada we routinely use US coins. In the State just use Canadian coins. Problem solved. The laws only apply to your own country and your own currency
      Gordie -- "I believe you understand what you think I said, but I'm not sure you realize that what you heard is not what I meant."

      Comment


      • #4
        Originally posted by Nitesky View Post
        Here in Canada we routinely use US coins. In the State just use Canadian coins. Problem solved. The laws only apply to your own country and your own currency
        Assuming that you were to use foriegn coins and that there were no legal problems..... there are a number of nickel-braze alloys that would provide a decent color match for either clad or nickel alloy coins and would be usable for either oxy-fuel or TIG process...

        there are some artists that use coins in their artwork seemingly without legal problems

        like the "Nickel Couch"

        http://www.homedesignfind.com/furniture-2/nickel-couch/

        Click image for larger version

Name:	MADNickelCouch.jpg
Views:	1
Size:	59.4 KB
ID:	512305
        Last edited by H80N; 12-28-2011, 05:22 PM.
        .

        *******************************************
        The more you know, The better you know, How little you know

        “The bitterness of poor quality remains long after the sweetness of low price is forgotten”

        Buy the best tools you can afford.. Learn to use them to the best of your ability.. and take care of them...

        My Blue Stuff:
        Dynasty 350DX Tigrunner
        Dynasty 200DX
        Millermatic 350P w/25ft Alumapro & 30A
        Millermatic 200

        TONS of Non-Blue Equip, plus CNC Mill, Lathes & a Plasmacam w/ PowerMax-1000

        Comment


        • #5
          I believe this is why Johnny Swing can make his furniture using US 5 cent pieces.

          Also this may explain why I see those hand cranked medal machines which turn a US penny into a souvenir.


          (b) The prohibition contained in §82.1 against the treatment of 5-cent coins and one-cent coins shall not apply to the treatment of these coins for educational, amusement, novelty, jewelry, and similar purposes as long as the volumes treated and the nature of the treatment makes it clear that such treatment is not intended as a means by which to profit solely from the value of the metal content of the coins.

          I will confess to putting a penny on a railroad track when I was 6 years old.
          Miller Dynasty 350, Dynasty 210 DX, Hypertherm 1000, Thermal Arc GTSW400, Airco Heliwelder II, oxy-fuel setup, metal cutting bandsaw, air compressor, drill press, etc.

          Call me the "Clouseau" of welding !

          Comment


          • #6
            Originally posted by Doughboyracer View Post
            United States Code
            TITLE 18
            PART I
            CHAPTER 17
            § 331. Mutilation, diminution, and falsification of coins

            Whoever fraudulently alters, defaces, mutilates, impairs, diminishes,
            falsifies, scales, or lightens any of the coins coined at the mints of
            the United States, or any foreign coins which are by law made current
            or are in actual use or circulation as money within the United States;
            or whoever fraudulently possesses, passes, utters, publishes, or
            sells, or attempts to pass, utter, publish, or sell, or brings into
            the United States, any such coin, knowing the same to be altered,
            defaced, mutilated, impaired, diminished, falsified, scaled, or
            lightened? Shall be fined under this title or imprisoned not more than
            five years, or both.

            Do people sometimes do this and get away with it?
            Sure they do. We've all seen it and yet no one seems to be swooping
            down on the violators to haul them off to jail.

            If this is the law spelled out before us in black and white then why
            doesn?t the government prosecute everyone who does it?
            Your guess is as good as mine; but nevertheless, there?s the law, just
            as it is written.

            Copied from this link...
            http://answers.google.com/answers/threadview?id=426715
            Just guessing here, but maybe the key word is "fraudulently"...
            Professional firefighter (retired). Amateur everything else I try to do...
            Oh yeah: GO BIG RED!

            Comment


            • #7
              Yeah, when I was kid, some of the guys would file pennies down to make them work as a dime in a Coke machine. That may qualify as fraudulent.
              CG
              Old Miller Swinger 180 Buzzbox
              Miller Diversion 165
              1945 Craftsman Atlas Lathe
              Smithy Lathe/Mill

              Comment


              • #8
                American coins

                This is an art proyect, is not to be nothing else than art proposes,

                Comment


                • #9
                  Look up Penny Hourders on Google

                  Recently read an article where people are stockpiling Pennys made prior to 1992. Why you ask? Copper Content. The older pennys have a fair amount of copper in them and with copper prices high right now, they are worth more by wieght than monitary value. But, because of the referenced statute listed in this thread, it would be a CRIMINAL ACT to scrap them for copper. With the growing sentiment that the penny should be done away with as money, when that is finally passed, then the penny hoarders could cash in. Also, the pennies cannot be shipped over then border to be melted down, something about illegal transport of foreign currency to intentially disrupt a government or ecomony, or something along those lines.
                  There is a bar in an antique shop in New Braunfels, TX that has all manner of coins, some of them quite rare and extremely valuable, laquered into the bar top and base pedistal. Thousands of coins on this bar, it's over 20 feet long and 3 foot wide. Haven't heard of any Feds trying to seize the bar. Buy the way, it's for sale if you have a home for it. As a matter of fact, that antique shop serves meals. If you like the table and chairs you're setting in, you can buy them too.
                  '77 Miller Bluestar 2E on current service truck
                  '99 Miller Bobcat 225NT for New Service Truck
                  '85 Millermatic 200 in Shop

                  '72 Marquete 295 AC cracker box in Shop
                  '07 Hypertherm Powermax 1000 G3 Plasma Cutter in Shop
                  Miller Elite and Digital Elite Hoods

                  Comment

                  Working...
                  X