Announcement

Collapse
No announcement yet.

Steel finishing

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Steel finishing

    Hey folks,

    I'm working on some indoor coffee tables and want to give them a gunmetal/burnished look without having to dip them into a bunch of crazy hot chemicals or spray paint -- I like the look of hotrolled steel but after I grind out the junctions there's the shiny bare matel next to the dark mill scale. Any ideas? The best I've found is:
    http://www.metallicfinishes.com/
    I'm working out of my garage and I'd like to keep it simple . . .

    Thanks --

  • #2
    oxy fuel rosebud, heat until bright red for a minute or so and let cool.
    Dynasty 200 DX
    Millermatic 175
    Spectrum 375
    All kinds of Smith OA gear

    Comment


    • #3
      there was another place posted in my to paint or not to paint posting. i'll see if i can find it for you.
      thanks for the help
      ......or..........
      hope i helped
      sigpic
      feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
      summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
      JAMES

      Comment


      • #4
        I have misted some bare metal projects with a rattle can of flat black paint and when dry, lightly by hand go over with a scuff pad and then clear coat. The paint tones down the shiny areas and has a nice raw metal effect. Home Depot sells Minwax urethane clear spray cans that have UV protecters.
        Sprays easily, dries fast.
        Nick
        Miller 252 Mig
        Miller Cricket XL
        Millermatic 150 Mig
        Miller Syncrowave 200 Tig
        2-O/A outfits
        Jet Lathe and Mill
        Jet 7x12 horz/vert band saw
        DeWalt Multi Cutter metal saw
        Century 50 Amp Plasma Cutter
        20 ton electric/hydraulic vertical press
        Propane Forge
        60" X 60" router/plasma table

        www.youtube.com/watch?v=jTu7wicVCmQ
        Vist my site: www.nixstuff.com
        and check out some of my ironwork and other stuff

        Comment


        • #5
          I sprayed some salt water on it and it's sitting outside . . . maybe in a few days it'll get less shiny . . .

          Comment


          • #6
            Originally posted by jtn View Post
            I sprayed some salt water on it and it's sitting outside . . . maybe in a few days it'll get less shiny . . .
            It will soon be a nice Rust color If this is what you want it can be a nice finish- just clear coat it.


            If you don't have an O/A set up like Laiky's suggestion you can use a Mapp Torch, which can purchased at any Box Store or Local hardware store
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment


            • #7
              You can use cold blue for guns. It makes a nice blue finish. Wax it with Johnson paste wax in the yellow can and forget it.
              David

              Comment

              Working...
              X