Announcement

Collapse
No announcement yet.

Is the 10LB. roll the smallest you can run on a MM212 or DVI or...

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Is the 10LB. roll the smallest you can run on a MM212 or DVI or...

    is there some kind of adapter one could get? Oh and will these machines run all the different wire sizes like the MM180?

  • #2
    http://www.millerwelds.com/om/o1330h_mil.pdf

    1-2 lb spools

    section 4-10
    Ed Conley
    http://www.screamingbroccoli.net/
    MM252
    MM211
    Passport Plus w/Spool Gun
    TA185
    Miller 125c Plasma 120v
    O/A set
    SO 2020 Bender
    You can call me Bacchus

    Comment


    • #3
      Broc i cannot get that link to come up. so i can run the smaller spools on a DVI2/MM212? I cannot find anything on the spec sheets. ............Tim

      Comment


      • #4
        Yes you can use an adaptor. I made my own...Bob
        Attached Files
        Bob Wright

        Spool Gun conversion. How To Do It. Below.
        http://www.millerwelds.com/resources...php?albumid=48

        Comment


        • #5
          i have used a MM210 with .025 wire so i don't see why the MM212 would not do it also. although truth be told it ran .030 on 20 gage fine. you just have to buy the roller kit for the wire size you want to use.
          cool adapter upi made aametalmaster.
          thanks for the help
          ......or..........
          hope i helped
          sigpic
          feel free to shoot me an e-mail direct i have time to chat. james@newyorkmetalart.com
          summer is here, plant a tree. if you don't have space or time to plant one sponsor some one else to plant one for you. a tree is an investment in our planet, help it out.
          JAMES

          Comment


          • #6
            Originally posted by Gsd34me View Post
            Broc i cannot get that link to come up. so i can run the smaller spools on a DVI2/MM212? I cannot find anything on the spec sheets. ............Tim
            That link is the on-line manual

            Go up to Resources and then Manuals, DVI etc

            You don't need an adapter- you just take the larger Spool Holder off .

            but you will have to order another spring according to the manual

            "Order extra spring
            Part No. 186 437"

            Same thing for the MM212
            Last edited by Broccoli1; 02-09-2008, 12:38 PM.
            Ed Conley
            http://www.screamingbroccoli.net/
            MM252
            MM211
            Passport Plus w/Spool Gun
            TA185
            Miller 125c Plasma 120v
            O/A set
            SO 2020 Bender
            You can call me Bacchus

            Comment


            • #7
              Thanks Broc! ..............Tim

              Comment

              Working...
              X