Announcement

Collapse
No announcement yet.

Power wheel chair armrest

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Power wheel chair armrest

    I made this a little while back for one of my players.
    With his spasms he wanted an armrest with a higher outside "wall" to keep his elbow from hopping off the rest. This is what I came up with.

    This was the first design:




    This is the re-design for better keeping his elbow affixed:
    Miller Mig 140 Autoset (2010)
    Miller Syncrowave 250 (1996)

    I have a lot to learn.

    -Joe

  • #2
    and some more:



    So that's how you keep an elbow planted on a chair!! haha

    For some reason I can't find pictures of how I mounted it to the chair post, but I put two holes in the bottom plate and welded nuts on the bottom so we didn't have to worry about losing the nuts with the arm rest. It has also been padded out with some 1/8" rubber
    Miller Mig 140 Autoset (2010)
    Miller Syncrowave 250 (1996)

    I have a lot to learn.

    -Joe

    Comment

    Working...
    X