Announcement

Collapse
No announcement yet.

212 Postion Jumper Links - input voltage?

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 212 Postion Jumper Links - input voltage?

    While setting up 212 for the first time I ran into postion jumper links question, input voltage 200 or 230? Do i need to buy a voltmeter to check?

    I have 200 amp service, it has a 30 amp breaker with # 8 wire I use for my thunderbolt and plasma cutter. Will that work? I plan on installing a 40 amp breaker with #8 for the 212. Am i on the right track?

    Any help would be greatly appreciated!

  • #2
    If this is in your residence/home shop than your service should be 230/240v if you are in the US.

    #8 wire & 40 amp breaker will be fine.
    Last edited by MMW; 09-24-2011, 04:08 PM.
    MM250
    Trailblazer 250g
    22a feeder
    Lincoln ac/dc 225
    Victor O/A
    MM200 black face
    Whitney 30 ton hydraulic punch
    Lown 1/8x 36" power roller
    Arco roto-phase model M
    Vectrax 7x12 band saw
    Miller spectrum 875
    30a spoolgun w/wc-24
    Syncrowave 250
    RCCS-14

    Comment

    Working...
    X