Announcement

Collapse
No announcement yet.

aluminized mufflers

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • aluminized mufflers

    Most replacement mufflers for older vehicles are aluminized steel. What is the advantage of aluminized steel over galvanized steel? Does it hold up to heat better?

  • #2
    It must have something to do with the heat. Where i used to work we made giant ovens and the skins were aluminized....Bob
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

    Comment


    • #3
      gl trying to find a galvanized muffler, they are all aluminized, its much the same idea as galvanizing, resists corrosion, and last a very long time
      mm210
      maxstar 150

      Comment


      • #4
        My aluminized Flowmasters have been through 12 Michigan winters and have only a small amount of rust on them. The rest of the exhaust system has rotted out several times!

        Comment


        • #5
          Originally posted by TS-Off-Road View Post
          My aluminized Flowmasters have been through 12 Michigan winters and have only a small amount of rust on them. The rest of the exhaust system has rotted out several times!
          That has more to do with the thickness of the material than the coating on it. You'll never find exhaust tube as thick as Flowmaster makes their mufflers. Chances are "the rest" of your exhaust system was aluminized too.

          Comment


          • #6
            Originally posted by ck welding View Post
            That has more to do with the thickness of the material than the coating on it. You'll never find exhaust tube as thick as Flowmaster makes their mufflers. Chances are "the rest" of your exhaust system was aluminized too.
            actually i would say the base material has a greater impact on corrosion resistance than either the coating or any small variation in thickness. i've seen some pretty *thick* steel tubing turn to mush because the base material was terrible.
            miller dynasty 350
            miller spectrum 1000

            Comment


            • #7
              Originally posted by ck welding View Post
              That has more to do with the thickness of the material than the coating on it. You'll never find exhaust tube as thick as Flowmaster makes their mufflers. Chances are "the rest" of your exhaust system was aluminized too.
              True, they are quite heavy.

              The stainless Flowmasters aren't much more $$

              Comment


              • #8
                SS Flowmasters No Longer Available

                Originally posted by TS-Off-Road View Post
                True, they are quite heavy.

                The stainless Flowmasters aren't much more $$
                Both the 304- and 409 Stainless Steel "Hushmaster" mufflers have been discontinued. All Flowmaster mufflers are manufactured from aluminized 16ga steel WITH THE EXCEPTION OF the new Super 44 Off-Road series, which are made from 14ga diamond plate (steel) and then aluminized. All muffler tubing is aluminized (unless ordered from a specialty shop or custom fabricated) and is usually either 18ga or 16ga.

                http://www.flowmastermufflers.com/pr...oducts_id=4157
                sigpic
                Clint Baxley
                Baxley Welding Service
                Rembert, SC 29128

                Comment


                • #9
                  I'm a dealer for Flowmaster

                  You can get most Delta Flow/40 and Delta Flow/50 Flowmasters in 409 SS and Hushpower II Flowmasters are 309 SS

                  Comment

                  Working...
                  X