Announcement

Collapse
No announcement yet.

First project

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • rbn14
    started a topic First project

    First project

    Well this took me a lot longer than I thought it would but I learned much! I still have to make a drawer for it to keep tungsten and stuff in. I want all my welding stuff to be in one place. I would defiantly appreciate any suggestions/tips/criticism as this is the first thing I have ever really made and am new to welding.








  • tacmig
    replied
    First project..

    If this is your first project and you are new to welding, you're on the right track!

    Looks nice..

    TackMig

    Leave a comment:


  • fabricator
    replied
    hey rbn 14,good job how about for your next project build me one and ill pay for the shipping!

    Leave a comment:


  • Lucky
    replied
    One thing I would do have done differently is have the handle come out infront so it is easier to pull. Other than that it looks great!

    Leave a comment:


  • storm
    replied
    Thanks for the tip!! You did a great job forming those. It looked like a huge pipe cut to size. I'll see if I can adapt that idea on mine. Take care and safe welding!

    Leave a comment:


  • fun4now
    replied
    Leave a little room rather than making it all a perfect fit as I was told some bottles are a little bigger than others so when you exchange it the new one might not fit.

    excelent advice, they can very by as much as 1 1/2" Di. i found out the hard way.

    Leave a comment:


  • rbn14
    replied
    Thanks for all the comments, it looks better in pictures when yo cant get that close!

    fun4now: I totally agree about the hook I noticed that last night when I put everything on it.

    storm: I just bend some 1 1/2" x 1/8" strap. Most carts I have seen use a chain and I dont really like that. I dont have many tools for fabrication yet so I just bent the strap around the bottle and over my knee. It's not totally round. If you know some one with a slip roller that would be excellent. For the top one I used a weldable hinge I picked up at the local welding supply shop. One half of the circle is fixed and the other half is welded to the hinge. Leave a little room rather than making it all a perfect fit as I was told some bottles are a little bigger than others so when you exchange it the new one might not fit.

    Leave a comment:


  • storm
    replied
    Hi there! New welder here! I just wanted to know how you got the round base support for the tank including the midbody support. I'm planning for my first welding cart but can't figure out how to fabricate that. It looks to me like it was cut from a big metal pipe. Thanks in advance//Jo

    Awesome cart btw

    Leave a comment:


  • EdZep
    replied
    looks good

    A unique and functional design.

    Leave a comment:


  • fun4now
    replied
    I Like It !!!

    looks great.
    wish mine was as cool. 8^((
    i still need to add a drawer to mine also.
    you might consider a place to sicure the torch a bit better. the hose holder looks like it might let a loop flop off dropping the torch to the ground and ending the cup's or cap's life. or even just hitting the leg of your welding table could break the cup with it sticking out the side.
    i suspect a nice coat of Miller blue paint is no order.
    i made mine out of aluminum so no paint for me. i needed the practice and beat of all the aluminum was free.

    welcome to the site and congratulations on getting the new Dyn.
    Attached Files

    Leave a comment:


  • uhohjim
    replied
    Looks fine to me .....functional and cool looking NIIIICCCCE
    Jim

    Leave a comment:

Working...
X