Miller Electric

Welding Discussion Forums

Home » Resources » Communities » Welding Discussion Forums

The forum is currently undergoing maintenance and is in a 'read-only' mode for the time being. Sorry for the inconvenience.


  • If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Announcement

Announcement Module
Collapse
No announcement yet.

metal art, to paint or not to paint ???

Page Title Module
Move Remove Collapse
X
Conversation Detail Module
Collapse
  • Filter
  • Time
  • Show
Clear All
new posts

  • metal art, to paint or not to paint ???

    so i been playing with this piece for almost a year.....ok maybe a little longer.
    so i'm getting closer to finishing it and cant quite decide if it should be painted or left as bare steel ???
    i plan on working on the base a bit still and then staining it a dark mahogany or deep reddish color.

    so what do you all think, paint or no paint ???

    not the best pic's i'll try to take a few better ones later tonight.
    Attached Files
    14
    paint it
    50.00%
    7
    no paint
    50.00%
    7
    Last edited by fun4now; 01-28-2008, 10:21 AM.

  • #2
    no paint

    i'd clean it up and spray water from a bottle to let form a little rust then clearcoat it

    Comment


    • #3
      I wouldn't let this rust because of too many details. Once it rusts, everything will just blend together.

      Comment


      • #4
        No paint.

        James,

        You and your other half have so much talent. I'm jealous.

        Comment


        • #5
          thanks TIG

          Comment


          • #6
            James, that piece is pretty cool looking, nice job. Half of me says to leave it the way it is and the other half says to paint it, either way it will still look good. Glad I could be so much help with your decision Dave

            Comment


            • #7
              Wow.

              You might think about just clear coating it with a high end
              epoxy/catalized clear like they use on car paint jobs.
              Then display it someplace that has a roof over it rather than being out
              in the exposure/harshness of full weather.

              That'd protect it, but you wouldn't lose the details and 'effect'
              (for lack of a better word) it has.

              .
              Last edited by Winger Ed.; 01-28-2008, 10:40 PM.

              Comment


              • #8
                I really like the concept and it turned out great. I'm the type that has to paint everything and I would be using an airbrush on it to big out it's strong points and then clear it.

                Bead blasting it and letting it naturally rust would look nice as well. Either way It's nice imaginative work and you the artist will have to decide

                Comment


                • #9
                  dabar39 James, that piece is pretty cool looking, nice job. Half of me says to leave it the way it is and the other half says to paint it,
                  that is exactly my problem. i picked up some air brush stuff for it a wile back with the intent of painting it. but now i just don't know ??? i like it in steel but at the same time ??? summer is the soonest it might bet put on display, so i have time to decide, just cant.

                  i think it would look really cool with black orange red and yellows all worked into it to look like a lava ball and a mostly red and black hand. it could look really cool in paint, at the same time paint takes the steel away...AAAAAAAAAAAAAAAAAAAAAAA
                  i'll wait and see if some thing just jumps out and screams at me.i suppose i could take a better pic and list it on e-bay as is for a ridicules $$ and see what happens. i can always offer to paint it for the buyer if requested, at the same time some one might want to paint it themselves ??

                  Comment


                  • #10
                    No paint

                    I think I'd have it sand blasted shiny and then try the hot linseed oil finish. If you've seen some of "hotfoots" stuff on the other boards you can get some fantastic deep golds, maroons and bronze colors that still let the beauty of the metal though.

                    The bell here is done that way.
                    Attached Files

                    Comment


                    • #11
                      that bell is way cool. i gotta learn how to do some of this stuff.

                      Comment


                      • #12
                        no paint

                        no paint


                        i hate painting. even with a can

                        Comment


                        • #13
                          Paint or not to paint

                          Originally posted by fun4now View Post
                          that bell is way cool. i gotta learn how to do some of this stuff.
                          No, your hand was cool. All I did was cut the bottom off a small O2 cylinder, sand off the paint and color.

                          Thanks

                          bob

                          Comment


                          • #14
                            so tell me how you collored it so i can do the same to my hand and it will be even cooler.

                            Comment


                            • #15
                              Pete sakes...

                              Paint the darn thing. Ya know how cool that thing would look in the hands of a skilled air brusher? Give it some personality with overlapping fire on lava against a neutral color with lots of clear. Make that sucker angry with the face of the devil in the palm with flames coming out the side. Use your imagination!!

                              By-the-way, it looks really cool!

                              TacMig

                              Comment

                              Working...
                              X
                              Special Offers: See the latest Miller deals and promotions.