No announcement yet.

New Syncrowave 200

  • Filter
  • Time
  • Show
Clear All
new posts

  • New Syncrowave 200

    I need to install a outlet for my new welder, What would be the best amp breaker I should use? Could I get by using a 40amp Breaker?

  • #2
    You might get by with a 40 amp breaker if you don't push the machine, I would recommend to get a 60 as asked for since you are going to need to wire anyway.
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter


    • #3
      I would sy be sure your lines can hold a 60 amp... to many times i hve seen people overloading there lines tthat come in to the breaker box. turn everything on in your shop and get a amp probe and be sure you have room for another 60 amps..