Announcement

Collapse
No announcement yet.

mm 251

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • mm 251

    looking at the mm251 any input thanks garth.
    garthswelding@aol.com trail blazer 301g with all the fixins:delta band saw dewalt chop saw craftsman drill press, sp-135 mm251 spectrum 375 suite case mig, tig w/hi freq. one welding truck.

  • #2
    Mm 251

    MM 251 It's a great machine
    Dynasty 200DX With TEC Superflex 9 & 17 Torches,
    Hypertherm 30A Plasma
    Rincoln SP130T Mig

    Comment


    • #3
      I too have the MM251 and really like it.What types of things are you going to be welding with your machine?

      Comment


      • #4
        any thing from sheet metat to fab for eqiupment the biggest reason for this purchase is I have one of those (nieghbors ) he sceams every time the trailblazer gets fired up had the cops here 4 times in 6 days in the afternoon well before the noise ordenance time.
        garthswelding@aol.com trail blazer 301g with all the fixins:delta band saw dewalt chop saw craftsman drill press, sp-135 mm251 spectrum 375 suite case mig, tig w/hi freq. one welding truck.

        Comment


        • #5
          We have 2 . Really great machines. The chart inside the cover is very accurate. Just set up the machine like the chart says and it will weld great. Saves time. Whata Neighbor??
          Scott
          HMW [Heavy Metal welding]

          Comment


          • #6
            Thats one neighbor who wont get anything fixed, Not by you I Hope...
            You cant go wrong with a MM251
            Dynasty 200DX With TEC Superflex 9 & 17 Torches,
            Hypertherm 30A Plasma
            Rincoln SP130T Mig

            Comment


            • #7
              NOOOOOOOOOOOOOOOO way. the last time the cops came by for mr. to noisy I offered to dig a hole in the back yard they wernt amused at all. so sooner or later we will sell this place and get acrage. and put my shop right in the middle of it.
              garthswelding@aol.com trail blazer 301g with all the fixins:delta band saw dewalt chop saw craftsman drill press, sp-135 mm251 spectrum 375 suite case mig, tig w/hi freq. one welding truck.

              Comment


              • #8
                I've run a few rolls of wire on my MM251 and no troubles.
                Bulldog
                5 Passport Pluses
                2 MM 212's
                MM 210
                MM 251 MIA
                MM 350 P w/Python
                Syncrowave 250
                w/ tig runner
                Trailblazer 302
                12RC w/meters
                Spectrum 1000
                Spectrum 2050
                2 Black BWEs
                Joker BWE
                Star & stripe BWE Digital
                2 star & stripe xlix's

                REAL TRUCKS RATTLE
                CUMMINS BABY

                Comment


                • #9
                  251mm

                  I love mine!!!! Get the spool gun too, welding aluminum is easy and fun. I do alot of welding on Winchester traps (cast ) .

                  I took the chart and put it into excel. Got tired of lifting the hood.
                  if you want a copy I will post it again on this board.

                  jim

                  Comment


                  • #10
                    trap doctor yea i weld a lot of aluminum to the spool gun that goes to my trailblazer will fit right on the 251 got that covered.
                    garthswelding@aol.com trail blazer 301g with all the fixins:delta band saw dewalt chop saw craftsman drill press, sp-135 mm251 spectrum 375 suite case mig, tig w/hi freq. one welding truck.

                    Comment


                    • #11
                      Originally posted by garth
                      any thing from sheet metat to fab for eqiupment the biggest reason for this purchase is I have one of those (nieghbors ) he sceams every time the trailblazer gets fired up had the cops here 4 times in 6 days in the afternoon well before the noise ordenance time.


                      Dontcha just love people like that? Your TB is probably less noisy than some of the lawnmowers around and I bet he doesn't complain about them. Sounds like you can already get him for harassment. He is probably the most miserable one in the area and is bent on making everyone else just as miserable.

                      See if you can rent a trained skunk to pay him a visit.
                      Don


                      '06 Trailblazer 302
                      '06 12RC feeder
                      Super S-32P feeder

                      HH210 & DP3035 spool gun
                      Esab Multimaster 260
                      Esab Heliarc 252 AC/DC

                      Comment


                      • #12
                        ?

                        Originally posted by Trap Doctor
                        I love mine!!!! Get the spool gun too, welding aluminum is easy and fun. I do alot of welding on Winchester traps (cast ) .

                        I took the chart and put it into excel. Got tired of lifting the hood.
                        if you want a copy I will post it again on this board.

                        jim
                        Jim , Do you know if the settings for your 251 and the 250x are the same? if they are I'd like a copy of the chart. Thanks, Farris
                        PS. Great idea!
                        Gone But Never Forgotten!

                        Comment


                        • #13
                          one better than skunk

                          I am not nice my wife says yesterday I took the muffler off the trailblazer and the service truck and the compressor and let them run while I was working for about 2 hours all pointed to his house while he was out side at the BBQ cops came and told him Quote. Now thats noise and its with in the time of the noise ordance. and told him to have a nice day. bet they will be glad when the 251 gets here. should be the next day or so. also getting a silencer for the trailblazer this month. the kind that is on those big genoraters that the hospitals have you can barley hear them at 30 ft.
                          garthswelding@aol.com trail blazer 301g with all the fixins:delta band saw dewalt chop saw craftsman drill press, sp-135 mm251 spectrum 375 suite case mig, tig w/hi freq. one welding truck.

                          Comment


                          • #14
                            Originally posted by garth
                            also getting a silencer for the trailblazer this month. the kind that is on those big genoraters that the hospitals have you can barley hear them at 30 ft.
                            Hey, keep us posted on that. I've been wanting to experiment but have been too busy. If you find something that works well and doesn't interfere with any backpressure requirements of the engine, I want to hear about it.

                            Comment


                            • #15
                              Things get otta control sometimes with people like that, esp. when they have been told to mind their own beeswax (I like that word, beeswax) . The guy across from me has more than a few kids that drive, so he has to park his work truck on the other side of his driveway. A new older lady moved in next door to him a few months ago from upstate NY, she keeps calling the cops that a unoperable truck is parked in front of her house. The cops kept coming and red tagging it even though it moves every day. A few days ago the desk sergent came and told her that the steet in from of her house was public and if she didn't stop, he would take her in for false statements. She is taking pictures every day of the cars and is getting a lawyer while building a case . People like that scare me, you never know how far they will carry things ... watch your back ... and on a lighter note, enjoy the new toy.
                              Regards, George

                              Hobart Handler 210 w/DP3035 - Great 240V small Mig
                              Hobart Handler 140 - Great 120V Mig
                              Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

                              Miller Dynasty 200DX with cooler of my design, works for me
                              Miller Spectrum 375 - Nice Cutter

                              Comment

                              Working...
                              X