Announcement

Collapse
No announcement yet.

Buckle

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Buckle

    This is a buckle I made for a customer. It's the name of his company. It is made out of 10ga. steel with a 1/8" pin for the belt latch and a 3/16" staple that the belt attaches to. I overlayed it with 22ga. german silver.
    Attached Files
    V-Dot Farm

    Millermatic 210 / spoolomatic 3035
    Millermatic 200 / Spoolomatic 1
    Miller 375 spectrum plasma
    Miller Econotig








  • #2
    Any chance you have some photos of the back? Just curious to see the "mounting hardware" that you described.

    I've done a couple of buckles, but I have always struggled with the "mounting".

    Later,
    Kev

    Comment


    • #3
      Very nice!
      Professional firefighter (retired). Amateur everything else I try to do...
      Oh yeah: GO BIG RED!

      Comment


      • #4
        I don't have a picture of the back of the buckle, but i am working on another on and will post the photo of the back when I'm done.

        Thanks
        Tubby
        V-Dot Farm

        Millermatic 210 / spoolomatic 3035
        Millermatic 200 / Spoolomatic 1
        Miller 375 spectrum plasma
        Miller Econotig







        Comment


        • #5
          Nice work Tubby, I like the detail.

          Gord
          http://gordsgarage.wordpress.com

          Comment

          Working...
          X