I have been lurking in the shadows for awhile, but i thought i would toss up pictures of the welding table in my shop, that my father built years ago. The base was an old portable basketball hoop form a local college that they were scraping. To move it you use a jack up a jack bottle jack and it presses down on a caster, which is connected to all four by a rod system. To set in place release the bottle jack and it sits flat on the floor. Table is 1/4" plate with space between plates to place c-clamps in the middle of the table. Extension at the end of the table for long metal. Cut off saw is flush with top of table.
No announcement yet.
welding table my father built