Announcement

Collapse
No announcement yet.

42" Hi Def flat screen corner mount.

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • 42" Hi Def flat screen corner mount.

    My wife bought a 42" flatscreen TV and we need it mounted in the corner. It came with brackets to hang on a wall but ours needs to be corner mounted. I made some brackets from 1" sq x 1/8 wall tube and welded 1/4"x2" plates on the end. Prob is there will never be a stud where you need it and the tv weighs about 60 + pounds so i am going to screw some oak strips on the wall into the studs then bolt the brackets into the oak strips. Then there will be a shelf hanging down to set the DVD player and the cable box on (not made yet)...Bob
    Attached Files
    Bob Wright

    Spool Gun conversion. How To Do It. Below.
    http://www.millerwelds.com/resources...php?albumid=48

  • #2
    pretty fancy!
    Jake

    Comment


    • #3
      Thats nice but won't you see the brackets from the front? at the ends? or is it just the right size to cover. Instaed of a cable box some new TVs take cable cards, is yours capable? Definately go HDMI from the cable box to the TV.
      Dynasty 200 DX
      Millermatic 175
      Spectrum 375
      All kinds of Smith OA gear

      Comment


      • #4
        Ha! I got ya beat by 5"! Just mess'n with ya. I've got a 47" I'm going to mount in a corner. Mind if I borrow you'r idea? I like it better than the $200 mounts available in stores.

        Comment


        • #5
          Nope copy away. Thats why i put up some pics. Good luck...Bob
          Bob Wright

          Spool Gun conversion. How To Do It. Below.
          http://www.millerwelds.com/resources...php?albumid=48

          Comment


          • #6
            Thanks! So how do you like you'r new TV? I absoulutly love mine. I've had mine about a month now and I'm still in awe every time I turn it on.

            Comment


            • #7
              I don't watch it much, i spend way too much time on the comp or in my shop when not working. Someone must like it because everytime i walk in the door its on and nobodys home. LOL.
              I got my wood strips up and my corners not 90 degrees as i figured so i am going to tweak the brakets a little in my bender to fit the wall...Bob
              Bob Wright

              Spool Gun conversion. How To Do It. Below.
              http://www.millerwelds.com/resources...php?albumid=48

              Comment


              • #8
                Bob,nice brackets.It's amazing how when our better half makes a purchase it sometimes turns into a custom fab/welding job. My wife is forever showing up with pieces missing items...One more excuse to go out in the garage and weld lol... she can't complain about that cause im making something for her.
                Nice Job Jim uhohjim1@aol.com
                Welding in Crete
                Syncrowave 350 LX
                Millermatic 252
                Millermatic 180 w Spoolgun
                Miller Gold Seal 155
                Miller Elite welding helmet
                JD2 Tubing bender with Hydraulic conversion
                Evolution Raptor15" SteelDry Cut Saw
                Hypertherm Powermax 30
                Some really cool hammers BIG and small

                Comment


                • #9
                  TV is hung, now to make a shelf and hide the wires...Bob
                  Attached Files
                  Bob Wright

                  Spool Gun conversion. How To Do It. Below.
                  http://www.millerwelds.com/resources...php?albumid=48

                  Comment


                  • #10
                    Bob,
                    That looks like a fine job. Do you think that the majority of the brackets could be hidden on a flat mount? The reason that I am asking is I had a similar idea. That is to attach a flat screen over the fireplace mantle. Initially I thought about placing it on the mantle. I made the mantle fairly strong, but when I felt how hefty some of the TVs were I decided against it. I was going to run all of the wiring in the wall from an adjacent cabinet. That way all of the tv accessories would be hidden. I also had the foresight to put a 120 v plug on the mantle. I object to the price of some of the cheap mounts I had seen. Do you know of or have any plans for a mount?
                    Thanks,
                    Nick

                    Comment


                    • #11
                      My TV came with small tabs bolted to the back that you hang a wire thru like a picture frame. But they wouldn't work for me. You could bend a 1/4" rod like this o^o with some heavy washers welded on the ends to bolt thru, that would be pretty good if it was hung into a stud. Just a thought...Bob
                      Bob Wright

                      Spool Gun conversion. How To Do It. Below.
                      http://www.millerwelds.com/resources...php?albumid=48

                      Comment


                      • #12
                        Another way would be make some wide u brackets from 1/4" x 2" one to screw into the stud and the other to screw into the tv. Then the bolts would be easy to bolt the 2 brackets together. Use 2 brackets on the tv one upper and one lower....Bob
                        Attached Files
                        Bob Wright

                        Spool Gun conversion. How To Do It. Below.
                        http://www.millerwelds.com/resources...php?albumid=48

                        Comment


                        • #13
                          I would only mount a tv on the wall if all the cables would be hidden. Here is one I built for a guy in Cali.

                          construction photos here:
                          http://www.flickr.com/photos/weldhou...7620719728080/

                          Attached Files
                          5x10 Bluco Fixture Table
                          Cincinnati shear 10'x1/4"
                          '11 Lincoln Power Mig 216
                          '10 Syncro200 TIG runner
                          Scotchman CPO 350 LT cold saw w/ AMS

                          Comment

                          Working...
                          X