Announcement

Collapse
No announcement yet.

Pulse capabilities

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Pulse capabilities

    I have a MM350P that I am using to weld 1/2" bar to 3/16 angle.
    I will be using the welders to join I- Beams to 3/4" plate.
    I have been reading some on the Pulse feature and it sounds interesting. I read all of the advantages for welding Alum and sheet metal. What are the advantages on thicker stuff?

    Thanks
    Mike

  • #2
    I've herd from a Miller rep that you don't want to pulse over 3/8" on aluminum, but I may be wrong. I thought the pulse feature was geared towards thinner stuff anyways.
    Welders do it hotter!!
    www.Munsonworks.com

    Comment


    • #3
      Originally posted by mpoteete View Post
      I have a MM350P that I am using to weld 1/2" bar to 3/16 angle.
      I will be using the welders to join I- Beams to 3/4" plate.
      I have been reading some on the Pulse feature and it sounds interesting. I read all of the advantages for welding Alum and sheet metal. What are the advantages on thicker stuff?

      Thanks
      Mike
      Out of position spray arc.

      Comment

      Working...
      X