If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I used a different approach using the tweco disconnects as i use a hi freq box and dont want any kind of jump from the leed reels to ground out anywhere , the locking mechanism is a very simple pin with a spring and a hole with a roll pin in it and two pieces of rod inside the 2 inch tubing u pull it and twist 90 degrees to unlock them and twist 90 and they lock , i have since built a oxy acet reel for the top of it
heres a link to estimate the capacity of the reels http://www.airwinch.com/tools/drum.htm