Announcement

Collapse
No announcement yet.

Freud Diablo Carbide Blades

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Freud Diablo Carbide Blades

    Just recieved my case of ten blades from a vendor on eBay. Cost 35 bucks each and I was very pleased with the $$. However after looking one over good is says on the blade 1/4 max material thickness. I have a new Evolution chop saw (cold saw for lack of a better description). I understand that the saw can cut 2" thick flats. Have I purchased the wrong blades?

  • #2
    According to their web site the maximum wall thickness is 1/4" for the 7 1/4" circular saw (Rage 1) and 14" cut off saw (Rage 2).

    http://www.evolutionrage.com
    Flash me! I'm a welder.

    American by birth, Union by choice! Boilermakers Local 60

    America is a Union

    Comment


    • #3
      Bob... Thanks I found that also shortly after my post. I should research a little before talking. My local welding supply displays an evo cutting a 3" solid!

      Comment


      • #4
        We demo'd an evolution circular saw a couple yrs ago and cut several pieces of 3/8" and one piece of 1/2". Dont know how long the blade would last but seemed to work OK
        Scott
        HMW [Heavy Metal welding]

        Comment


        • #5
          I'll try to let you know the longevity of them. I am getting ready to cut a bunch of 1" solid

          Comment

          Working...
          X