Announcement

Collapse
No announcement yet.

SS Planter Box

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • SS Planter Box

    I'm making a SS planter for a friend. Dimensions are gonna be approximately 10"x10" 3' tall made from 16ga with a shelf 8" from the top to put plants in. I'm getting 2 pcs bent into 10" L's and then welding the 2 together and a cap at the bottom and some strips at the top for the shelf. Any tips on keeping the tube from warping or anything else?

    I'll be welding it with my diversion165, with 1/16 2% ceriated tungsten, #6 cup is all I have at the moment, I'll be getting some .035 SS wire. sound good like a good start?
    Dynasty 200DX
    MillerMatic 211
    Hypertherm Max 42

  • #2
    Why not do 3 bends and one seam weld up the side?
    Miller Syncrowave 200
    Homemade Water Cooler
    130XP MIG
    Spectrum 375
    60 year old Logan Lathe
    Select Machine and Tool Mill
    More stuff than I can keep track of..

    Comment


    • #3
      shop I went to can't do it cause the third bend would cause it to hit on the back of the break
      Dynasty 200DX
      MillerMatic 211
      Hypertherm Max 42

      Comment

      Working...
      X