If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
tacked together and welded. and the top is finished.. i dont really like the thermometer placement so on the next one i'll make a change.. maybe raise to creat a bump between the top and the first bend..
finished the bottom today. Added the air inlets to help it breath. Also cut & bent the pipe for the burner. cleaning it up in the morn, weld it and drill the holes. alittle bit of cleanup and fire this puppy up tomorrow hopefully.
miller 225 bobcat
miller aead200le (with miller hf tig trailer mounted)
mm175, mm211, TA181i
mm252 w/30a spool gun
precision tig 225
hobart stickmate LX ac/dc
Speedglas 9100X & XX / Miller Digital Elite
hypertherm 380 & cutmaster 52
victor journeyman & super range
ridgid chop saw, kalamazoo band saw
steel max and evolution carbide saws
6 4.5" & a 20lb 9" rockwell grinders
case 580 backhoe (for what i can"t lift)
if first you don't succeed
trash the b#####d