Announcement

Collapse
No announcement yet.

Dryer for SpectrumŽ 2050

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Dryer for SpectrumŽ 2050

    Where is a good place to purchase dryers for my new plasma cutter? How many are recommended in series to insure quality filtering?

    Thanks

  • #2
    Originally posted by Trap Doctor
    Where is a good place to purchase dryers for my new plasma cutter? How many are recommended in series to insure quality filtering?

    Thanks
    A Motor Guard M-26 with 4 extra filters is $101 from IOC, or you can normally get a M-30 filter off ebay for lots cheaper (from the information I have they are the same). One should be enough I would think, maybe others would recommend more but I don't have any humidity here to speak of and the one motor guard works fine for me. Check this link for more info on this http://www.millermotorsports.com/mbo...=plasma+filter
    Last edited by Sundown; 04-14-2006, 08:12 AM.
    Regards, George

    Hobart Handler 210 w/DP3035 - Great 240V small Mig
    Hobart Handler 140 - Great 120V Mig
    Hobart Handler EZ125 - IMO the best 120V Flux Core only machine

    Miller Dynasty 200DX with cooler of my design, works for me
    Miller Spectrum 375 - Nice Cutter

    Comment


    • #3
      Here is one at a good price

      cgi.ebay.com/ebaymotors/Compressed-Air-Filter-Sub-Micronic-Water-Filter-Trap_W0QQcmdZViewItemQQcategoryZ63702QQitemZ462188 8254QQrdZ1QQsspagenameZWD1V cgi.ebay.com/ebaymotors/Compressed-Air-Filter-Sub-Micronic-Water-Filter-Trap_W0QQcmdZViewItemQQcategoryZ63702QQitemZ462188 8254QQrdZ1QQsspagenameZWD1V
      Last edited by envano; 08-21-2007, 01:58 PM. Reason: broken link

      Comment

      Working...
      X