Announcement

Collapse
No announcement yet.

My DIY press brake 7

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • My DIY press brake 7

    Condensed to thread here: http://www.millerwelds.com/resources...-press-brake-1
    Last edited by Joe from N.Y.; 10-21-2010, 08:31 PM.
    Millermatic 211
    Everlast 200DX TIG
    Lincoln Weld-Pak 100
    Century Stick welder
    Hypertherm Powermax 30 plasma cutter
    Oxy set-up with Henrob 2000 torch
    Logan 200 lathe (60 years old)
    Jet band saw

  • #2
    Hi Joe,
    Great project.
    I am surprised that it will bend the bar to 90 degs.
    Press brakes usually have a die with the apex removed and an angle less than 90 degs.
    Still that said yours seems to work fine well done.

    Ji
    Grip it and Rip it

    Comment


    • #3
      Nice! That looks serious...
      Professional firefighter (retired). Amateur everything else I try to do...
      Oh yeah: GO BIG RED!

      Comment


      • #4
        In the future, remember there's nothing wrong with hitting "reply" on your own thread. You can do this indefinitely, posting pictures each time. The advantage, of course, is for all the rest of us, we don't have to skip around to seven different threads to see everything. The limit on pictures, is only for each post, not for the thread total.
        Obviously, I'm just a hack-artist, you shouldn't be listening to anything I say .....

        Comment

        Working...
        X