Announcement

Collapse
No announcement yet.

line bore job

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Don't forget the trusty scarfing tip
    Jeff

    Comment


    • #32
      update

      Initial placement of the boring bar with alinement cones.
      Add bearings and support plates.


      Name:  8f6696f4989074f78be0fc30cb03b29c.jpg
Views: 1
Size:  48.5 KB
      Name:  0ef4bbb1474041182eb792daa224880b.jpg
Views: 1
Size:  63.0 KB
      Name:  16b043d85b02b54724bfb5e7118c59dd.jpg
Views: 1
Size:  59.4 KB
      Name:  710578ae22709b39ba743a08698dc213.jpg
Views: 1
Size:  75.4 KB

      Comment


      • #33
        Place 24 in feeder
        aline it to the bar
        lock in place
        Hook up hydraulics

        Name:  fa5816a1dd6d453084c2e4edc7edd6de.jpg
Views: 1
Size:  41.3 KB
        Name:  af2f9e0de0adcd6ba5cce10d2b39f030.jpg
Views: 1
Size:  52.8 KB
        Name:  0f9af28ff855aada9fe43bc57f02807d.jpg
Views: 1
Size:  54.5 KB
        Name:  7c132d3038cd685e49a2f0691ae58151.jpg
Views: 1
Size:  62.4 KB

        Comment


        • #34
          close ups of my homemade feeder

          Name:  9d45271218b4bc47b947daa59bb6b6e8.jpg
Views: 1
Size:  79.7 KB
          Name:  ef9f2ee2ac29523ae9803e21a5d25315.jpg
Views: 1
Size:  45.8 KB
          Name:  f5643e48a1784ea5c8d4f86b274c810a.jpg
Views: 1
Size:  45.3 KB
          Name:  fd51f28f85d244252bf36c48115088f4.jpg
Views: 1
Size:  53.4 KB

          Comment


          • #35
            update

            Name:  2b415f5a8c97b5be32977234827eea33.jpg
Views: 1
Size:  68.4 KB
            Name:  62bab8638c74142341882939adc76d9f.jpg
Views: 1
Size:  37.9 KB
            got all set up today just before dark will bore 1st thing in the morning.
            Hope u find it interesting.

            Comment


            • #36
              I do like your feed setup. Does the orbit motor have enough power at low speeds?
              Jeff

              Comment


              • #37
                Originally posted by J hall View Post
                I do like your feed setup. Does the orbit motor have enough power at low speeds?
                O yea there is a lots of torque even at 50 rpm i can snap off a 1/2 tool like nothing. my truck has 26 gpm of flow at base idle so there is plenty of volume at 1800 psi.

                Comment


                • #38
                  That's a pretty slick low-budget feed unit. I just bought one that's older than dirt. Uses a 3/4" drill to drive it. Gearbox reduction from 1725 rpm to about 200 rpm. The gearbox also drives an automatic feed .008" per rev.
                  Works great-- when the drill finally gives up I will replace it with a DC motor and ratiotrol from Boston Gear
                  Big Blue 400D
                  Trailblazer 302
                  Miller S-32 suitcase
                  12VS suitcase
                  Lincoln LN-7 (BIG suitcase)
                  Victor torches
                  Lincoln 350MP with 35' push-pull gun
                  Lincoln PrecisionTIG 375
                  Spectrum 1000 plasma cutter

                  Comment


                  • #39
                    That's a pretty slick low-budget feed unitn.

                    Thank you

                    I just bought one that's older than dirt. Uses a 3/4" drill to drive it. Gearbox reduction from 1725 rpm to about 200 rpm. The gearbox also drives an automatic feed .008" per rev.

                    Well how bout some pics please!!! In use would be even better.

                    Works great-- when the drill finally gives up I will replace it with a DC motor and ratiotrol from Boston Gear[/QUOTE]
                    gear reduced dc motor is what I started with it worked great but a little low on the torque hard to beat hydralic for power per size. looking forward to the pics.

                    Comment

                    Working...
                    X