Announcement

Collapse
No announcement yet.

tube benders

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • UFO8MyCow
    started a topic tube benders

    tube benders

    I would like to buy a tubing bender for the shop I work at but Im not sure wich way to go. the majority of the work I will be doing will be with 1" to 2" tube but it would be nice to be able to use it for smaller stuff as well. I have looked at the hossfeld but it would end up being out of my price range with all of the dies for it. I dont want to spend anymore that about $1000 for the whole setup.

  • ace4059
    replied
    Originally posted by pollaccia View Post
    how do you like this bender? I plan on buying one soon.
    I like it. It bends the thinner stuff with no problem. i bent some 1.75" by .134" wall DOM tube with it and I had to have a cheater to do it. A friend did some 1.5" by .250" wall DOM tube with it. Now that was a little scarry. He used the tube for a track bar on his jeep.

    So on the thinner stuff .125" wall and less it work great. But on the thicker stuff you kinda struggle with it for a full 90 degree bend.

    As far as protools vs. the JD@.
    The JD2 has a nicer handle but protools makes there out of thicker metal (the HD model)

    Leave a comment:


  • Broccoli1
    replied
    Originally posted by c neck View Post
    i was looking at shop outfitters anyone have one of these
    Yes.

    Won't do 2" though

    1-1/4" Max. but it does have accessories for Scroll work, Picket Twisting and baskets for Pickets.

    Gonna set ya back about a 1,000.00 for the Bender and a couple of dies.

    Leave a comment:


  • c neck
    replied
    benders

    i was looking at shop outfitters anyone have one of these

    Leave a comment:


  • walker
    replied
    I bought the American Bender version of the #2 Hossfeld (direct copy). The guy is good to deal with. I think the basic bender is about $800 and comes with tooling to do flat bar and solid square/round. I bought 1" square and round dies for about $200ish each. I am sure the web page is WWW.americanbender.com, or somthing close to that, google if its not. High quality, good support.
    A

    Leave a comment:


  • pollaccia
    replied
    bender

    Originally posted by ace4059 View Post
    protools makes a good one. So does JD2. The model 3 as show in the post above is good. The manuel benders are about the same style so it is just a brand preference. I got the protools one because it was made out of thicker metal.(1/2" insteaed of 3/8").
    how do you like this bender? I plan on buying one soon.

    Leave a comment:


  • jkmola
    replied
    Here's a link from a previous post. It requires a little diy, but if you're here - that shouldn't be too big of a deal.

    http://www.pirate4x4.com/forum/showt...ht=pipe+bender
    Last edited by jkmola; 12-22-2007, 09:54 AM.

    Leave a comment:


  • ace4059
    replied
    protools makes a good one. So does JD2. The model 3 as show in the post above is good. The manuel benders are about the same style so it is just a brand preference. I got the protools one because it was made out of thicker metal.(1/2" insteaed of 3/8").

    Leave a comment:


  • Jeepnford
    replied
    Take a look at these. I have a hydraulic model 4 but if you don't mind bending manually for awhile you could get the model 3 and some dies for less than $1000.00 and add hydraulics later if you wish.
    http://www.tricktools.com/model_3_bender.htm

    Leave a comment:

Working...
X