Announcement

Collapse
No announcement yet.

Alumimiun Welder Trolley

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Alumimiun Welder Trolley

    At present my TIG welder is on the floor of my welding bay.
    I really need to get it up onto a trolley where I can move it about a bit easier.
    On Friday I picked up my precut order from the local ali dealer ready to start my latest project a welder trolley.

    Ji
    Attached Files
    Grip it and Rip it

  • #2
    I measured the welder and drew a quick hand sketch. I then took a trip to a hardware and picked up some castors.

    Ji
    Attached Files
    Grip it and Rip it

    Comment


    • #3
      With an air hacksaw I cut out the corners.
      This will allow me to bend the corners to a 90 deg angle before welding.

      Ji
      Attached Files
      Grip it and Rip it

      Comment


      • #4
        By cutting and bending this way you get a nice rounded corner.
        Don't worry about spending to much time smoothing the cut as it is going to be welded anyway.

        Ji
        Attached Files
        Grip it and Rip it

        Comment


        • #5
          Using a 90 deg welding clamp TIG weld the connecting corner.
          Now that it is a square frame do any required straightening adjustments.

          Ji
          Attached Files
          Grip it and Rip it

          Comment


          • #6
            I did not forget to S/S wire brush the metal nor did I forget to wipe the area down with a acetone damp rag.

            Ji
            Attached Files
            Grip it and Rip it

            Comment


            • #7
              I then cut out the wedge shapes from the corner positions and welded another tube frame.

              Ji
              Attached Files
              Grip it and Rip it

              Comment


              • #8
                Next I cut the corners out of the tread plate ready for folding.

                Ji
                Attached Files
                Grip it and Rip it

                Comment


                • #9
                  Using a folder I folded the tread plate into a pan.
                  I did two of these, one will be the bottom shelf and the other will be the pan the welder sits in.

                  If you don't have a folder or access to one just weld the sides on, it just means more TIG welding.

                  Ji
                  Attached Files
                  Grip it and Rip it

                  Comment


                  • #10
                    At this stage I have two tube frames and two shelves.
                    I will need to weld all the joints and seams up but at this stage we can continue to test fit see if any adjustments are required for squareness.

                    Ji
                    Attached Files
                    Grip it and Rip it

                    Comment


                    • #11
                      This is great and very informative, but does anyone know a way that these sorts of posts can be done with one multi-photo posting? If there a forum rule limiting one photo per posting, that rule should be changed. If there is no such rule, there needs to be some instructions on how to put several photos in one post. I checked the FAQ and and even searched for "posting photos", but got no info later than 2002, which was before the board was redesigned.

                      Comment


                      • #12
                        Looking forward to seeing the finished product.
                        Kemppi Pro Evolution 4200
                        Kemppi 530 wire feed with MXE panel
                        Kemppi ProCool ( coming soon)
                        Cigweld TransMig 210se
                        Cigweld TransTig 200 AC/DC
                        Hypertherm PowerMax45
                        CutSkill O/A setup
                        Speedglas 9000x adflow
                        Speedglas 9100xx

                        Comment


                        • #13
                          Originally posted by lens42 View Post
                          This is great and very informative, but does anyone know a way that these sorts of posts can be done with one multi-photo posting? If there a forum rule limiting one photo per posting, that rule should be changed. If there is no such rule, there needs to be some instructions on how to put several photos in one post. I checked the FAQ and and even searched for "posting photos", but got no info later than 2002, which was before the board was redesigned.
                          Just a suggestion, but you could try to copy and paste them.

                          Comment


                          • #14
                            When I post pics it seems like I can put 4-5 at a time if the files are not too big.
                            I'll admit it is a bit annoying to have only one per post........but no one care what I think....sniff
                            Nick
                            Miller 252 Mig
                            Miller Cricket XL
                            Millermatic 150 Mig
                            Miller Syncrowave 200 Tig
                            2-O/A outfits
                            Jet Lathe and Mill
                            Jet 7x12 horz/vert band saw
                            DeWalt Multi Cutter metal saw
                            Century 50 Amp Plasma Cutter
                            20 ton electric/hydraulic vertical press
                            Propane Forge
                            60" X 60" router/plasma table

                            www.youtube.com/watch?v=jTu7wicVCmQ
                            Vist my site: www.nixstuff.com
                            and check out some of my ironwork and other stuff

                            Comment


                            • #15
                              I was invited to use a Miller Syncrowave 250 so I tack welded all the parts together at my workshop and headed off.
                              I have used the Syncrowave before but only for steel never ali so the settings may be a little incorrect but it got the job done. I must admit I prefer an inverter machine now as you can fine tune your weld a little better. The reg meter on the gas bottle only had 2 notches of gas left so I think there was not enough sheilding gas because towards the end the puddle just kept oxidising.

                              Ji
                              Attached Files
                              Grip it and Rip it

                              Comment

                              Working...
                              X