Announcement

Collapse
No announcement yet.

Tig weld with engine driven welder

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Tig weld with engine driven welder

    I own a miller Blue Star 6000 and my work truck is set up with a Bobcat.
    I have read that both these machines will tig weld?
    I always thought they ment that they would function as a generator to power a seperate tig welder.
    I have never tig welded and have done very little reasearch about this process.
    Will these machines tig? And if so what do I need to set them up and how do you connect everything.

  • #2
    yes, dc scratch start can be done on any dc stick welding machine like the bobcat or bluestar

    you need a manual gas valve torch, a regulator, and the proper dinse connector
    mm210
    maxstar 150

    Comment


    • #3
      ...and work very well I might add! Had a chance to use them a couple times on some stainless on my last 2 jobs.
      Modern Metalworking L.L.C
      Blissfiled, MI
      517-605-9481

      Miller Dynasty 350 Tig runner
      Hobart 3-phase mig
      Hypertherm 1000 plasma
      Mill
      Lathe
      Box break
      Shear

      Comment

      Working...
      X