Hi guys I dont post here a lot, but i read quite often. I work in a plant that has quite a few mig welders. In the dept. i work in we have an old Miller CP250SM with a hobart 17 feeder. One of our other depts has 2 MM350P that they are not using anymore. I was thinking of trading out the CP250SM for the 350P. However the Engineer that is in my dept says the CP250 is a better welder because it is bigger in size "It is bigger and more powerfull" remeber he is an engineer. From everyting i have heard the MM350P is the Cats meow. Am I worng. We mostly weld Thick wall square 1.5" tubing and plates that are no greater than .5" to that tube. Thanks for your help.
No announcement yet.